NSFW [emoji23]

Detailed again, and laid down some Adam's ceramic boost.

Also picked up this cordless shop blower. It's light enough to hold with one hand while you hold your drying towel in the other. Gets the water out of the mirrors, gas cover, grill, lug nuts, so it isn't dripping later. Plus the black hose part is rubbery, so it won't scratch your paint if you accidentally bump it.

Sent from my SM-G998U using Tapatalk

 

NSFW [emoji23]

Detailed again, and laid down some Adam's ceramic boost.

Also picked up this cordless shop blower. It's light enough to hold with one hand while you hold your drying towel in the other. Gets the water out of the mirrors, gas cover, grill, lug nuts, so it isn't dripping later. Plus the black hose part is rubbery, so it won't scratch your paint if you accidentally bump it.

Sent from my SM-G998U using Tapatalk

Thanks for sharing the pic of the shop blower. Bet it cuts down a lot of the drying time.

 

Back to Death Valley for low altitude 1/4 mile tests on my new 97 octane tune from Jay Greene.

 

Where are you getting 97 out here in Vegas?

 

A little something in the works…if I can’t get a 2021 I’ll just make my own [emoji848]

Build thread: 2016 R/T - awehlage’s build

 

Just a button swap?


Sent from my iPhone using Tapatalk

 

Installed the ZL1 rock guards a few days ago. Nanook likes riding shotgun with me, but said he wasn’t sure about the rock guards yet. Will get around to switching out to the black lugs at some point. They are still sitting in the rear cargo area. Once they are on, no more chrome on the exterior.

 

He looks so at home behind the wheel, it might be YOU who likes riding shotgun with HIM, brother. 😉

 

Haven't repainted the little notch on the fender trim yet?

 

No, I have way to much crap to do to add to the list at the moment. If it needs to go to the body shop, I’d have them paint those squares for sure lol. It doesn’t bug me that much to have to make an appointment, drop it off, arrange for transportation, etc. Not at the moment anyways.

 

PCM / TCM Tuning Run

Sent from my iPhone using Tapatalk

 

She sounds purtty!

 

I rigged a 12v actuator to lock into an I-bolt at the upper center console. When engaged the I-bolt keeps the top compartment locked and hidden until a hidden switch retracts the actuator and allows it to open. .

 

Pretty slick


Sent from my iPhone using Tapatalk

 

Brilliant, brother!

 

Removed the chrome Durango letters rom hatch.

 

I kinda like them. They definitely blend in well. Can’t even see them in this light. I was hoping in addition to helping with rocks, they’d help stop some of the wheel dressing I use from kicking up down the sides of the truck……and they do not. 😞

 

Nice Rig

 

Steve, one of the members here, is selling a gently used kit if you get the itch.

 

Upgraded the interior lighting where I could. There’s warm factory LEDs that cannot be replaced in the front, middle and rear fixtures. The wheel wells, vanity mirrors and hatch lights can be completely switched. For the rear hatch, you need to have access to the interior of the hatch to re-seat those correctly. I did not switch those out as of yet.

 

Built a new sub box. Need to carpet it but it sounds better and frees up a bunch of space.

 

Looks great. How much air space is down there. I got two 12s that need a home there but may have to be one depending on airspace!

 

Replaced my AEM wideband with a PLX. Was recommend by Jay Greene cause the AEM I had was a bit too bouncy and laggy to get it anymore dialed in. So far it seems way more stable. Also has some other pretty cool features. If I ever go boosted, this is a multi gauge so it can be used as a boost gauge too. Has sensor health feature which detects the "life" of the o2 sensor (my current one was still 100%), and has a sensor reaction time setting.

 

Purpose of the toggle switch attached to the gauge?

 

I tested my snow tires exploring the steep water ways of a corn field this morning. I am very satisfied with what it will do. Supposed to get 8" here tomorrow, so I will repeat the test in some deeper stuff then.

 

I tested my snow tires exploring the steep water ways of a corn field this morning. I am very satisfied with what it will do. Supposed to get 8" here tomorrow, so I will repeat the test in some deeper stuff then. View attachment 119040
View attachment 119041

Seeing your great pics, one thing immediately came to mind: Fargo but with a way cooler ride.

 

Had a dual in dual out blackwidow muffler put on the RT today. Kind of disappointed in the sound, I almost can't even tell a difference in the sound. I put the venom 250 in where the suite case was, also I left the factory resos in the rear.

I'm going to give it a few and take it back and try something else.

 

Had a dual in dual out blackwidow muffler put on the RT today. Kind of disappointed in the sound, I almost can't even tell a difference in the sound. I put the venom 250 in where the suite case was, also I left the factory resos in the rear.

I'm going to give it a few and take it back and try something else.

View attachment 119115

Replace the rear resonators with something more straight through. The resonators muffle quite a bit more than the suitcase.

 

Got it all set up for the snow. Trackhawk reps with Blizzaks. Rides way softer then the with the stock run flat p zeros.

Sent from my SM-G991U using Tapatalk

 

Looks nice too..


Sent from my iPhone using Tapatalk

 

Finally got to tow something.
But damn Uhaul gave me a dirty ass trailor. 🤬

 

I did that once. Cheaper than getting the big truck for an in town move.

 

BT Catch Can last night and oil change today.

 

Just a few minor things, console mat inserts and a trunk net to hold some things:

 

Bought a performance hood off of a 2021 RT... Same color as my Citadel.. Will have it here Monday
Pics: My 2011 Hemi Citadel

Sent from my LM-G820 using Tapatalk

 

Where are all the grills?

 

They were removed.I have them coming. I got the hood for a very good price...

Sent from my LM-G820 using Tapatalk

 

Did this..

My 2011 Hemi Citadel

My 2011 Hemi Durango Citadel I've been around for a few months...just thought I would post a few pics of my 2011. It has custom cold air induction, Flowmasters and an old school H pipe with rear resonator delete, two Rockford Fosgate 10" and 500 watt amp added to stock Alpine/Nav system...

www.dodgedurango.net

Sent from my LM-G820 using Tapatalk

 

Installed Canvasback cargo cover. Easy install, good coverage. And no that’s not discolouration, just weird lighting 😂

 

that's awesome, i might want to look into this

and it looks like you can pull the back seats up without removing any of it, is that right? and how tacky is the material? it looks like canvas but if it's grippy that would be better suited against sliding items. i have the floor mats all around but have been struggling to figure out what to do with the back. im constantly putting the seats up and down. i try to keep them up for the wife because i feel like it mutes the exhaust a little more for her, but most of the time we are out getting anything it's too big to leave them up

 

Looks like it's set up for hazmat duty.

 

Makes body cleanup much easier.