Hmm interesting. I'm in that area

 

Would you be willing to contact them and let the take measurements to make these ?

 

I sent them an email. They are about 1.5 hrs from me but I don't mind a drive down to the beach for lunch

 

Ok, thanks. Let me know what they say ! I wish I could take a ride to the beach at lunch time, snow here still

 

subscriber to this thread!

 

I would imagine any 3rd gen Durango would work for this.

 

Maybe, but the SRT have wider tires and wheels so I would assume they want to see how far out the rock guards would need to be.

 

I made arrangements to go there on the 14th. Will let you know how it goes.

 

Ok, Thanks. I appreciate it !!

 

Fitment done. You can now order these Pete.

 

Fitment done. You can now order these Pete.

View attachment 94097

What do you think of them ?

 

Will these work on a ‘16 R/T? Looks like they are made for the wider SRT skirting, but the holes would be the same? Are they molded to the skirting at all? I really like these and have been looking for something like this for a long time. I may have seen them originally on the sedans, but they didn’t make them for the Durango. Nice clean look with some functionality. Keeps the sport look.


Sent from my iPhone using Tapatalk

 

How do they mount/fit?

Are they moulded and shaped? Paintable?

 

I think they look good. Pretty inconspicuous as you mentioned. I hadn't planned on getting them myself really but he stuck them on so there they are lol. I'm really hoping they help minimize the road grime there on the fender. Its a mess ll the time. I got a white one so it would look clean longer lol after having a black car the last 10 yrs. Kidding myself there! I think the dude that makes them was going to list them for all Durangos from 2014 and up I think he said. They just clip on. They are not molded.

 

Clip on.... so are they easily removable?


Sent from my iPhone using Tapatalk

 

Can you snap some pics of them close up from inside the wheel well?

 

Tell me if this works..Im horrible at taking photos. I was mistaken...there is one screw on the bottom of rear Guards. The fronts have zero screws..all snaps. I just removed and tested it and super easy and Im a girl with nails

 

Nice!

Has he mentioned pricing and availability yet? Might get these for my AWD Charger too. Do you feel they look weird on yours? They look very inconspicuous for a car, I'm thinking it will blend in, but thought I'd ask.

Edit:
Never mind LOL!

https://zl1addons.com/collecti...at-2015-16?variant=27479586113

You could barely see them on my charger !
Sent from my SM-N950U using Tapatalk

 

Finally installed these on my DDSRT. Good fitment and easy to install. The clips actually hold them on there pretty good. I tried the OEM splash guards and the front and the back weren't even close to fitting so these were a nice alternative.

 

View attachment 97730 View attachment 97738

I installed mine today

 

I have these installed on my dsrt as well. Good fitment. I went an little extra and added some double sided tape to the inside of the guards along with the clips just to be safe. So far they are holding up. Very good product. Very subtle look to them. They are not bulky and don't protrude out a lot but still offer a decent amount of coverage. And I like how they follow the flow of the fender well. ????

 

How loose are the clips once installed? I’m trying install these now and I’m not sure I received he right ones. The clips are loose once installed. Also I had to turn them in a good bit just to get the clips to reach the flap

Sent from my iPhone using Tapatalk

 

Here is a pic of the guards I received

Sent from my iPhone using Tapatalk

 

My clips were very tight, almost hard to put on they were so tight.

I’m not sure you got the right rock guards unless they are a new style. Mine don’t have all those cut ins like yours and cover the entire painted part inside the fender.

 

2018 DDSRT ZL1 Add ons

It looks like you put them on the wrong wheels. It looks to me like you put the front ones on the back. Take a look at mine and how they fit.

View attachment 98593 View attachment 98601 View attachment 98609 View attachment 98593 View attachment 98601 View attachment 98609

 

It looks like you put them on the wrong wheels. It looks to me like you put the front ones on the back. Take a look at mine and how they fit.

View attachment 98593 View attachment 98601 View attachment 98609 View attachment 98593 View attachment 98601 View attachment 98609

They are marked front and rear. The ones on the rear are the widest of the two. The front set is even narrower. I’ll give them a call today.
Thanks all for the input. [emoji16]


Sent from my iPhone using Tapatalk

 

I also think you have the wrong ones. The ones I have look different, and I got mine two weeks ago. They are for a 18 DD RT.

 

Any pictures of them on the RT?


--

2017 Dodge Durango AWD R/T Granite Blacktop

Performance
SRT Air Box, K&N Intake Tube, K&N Filter, Fastman 86mm TB, Ported Intake Manifold, 180° Thermostat, Billet Tech Catch Can, Corsa Catback, Grocery Getter Strut Brace, Diablosport Trinity, Jay Greene PCM/TCM Tune

DiabloSport Trinity Times 0-60 5.17, 1/4 13.77​

 

ZL1 said I was sent a set for the Demon. New set is in the mail [emoji1303]


Sent from my iPhone using Tapatalk

 

The Durango is getting built now, once I install them Ill post some pic here.

 

I have a front and rear set on the way for my SRT. Will post pictures when done.

 

So I received mine and can’t tell what goes where. They aren’t marked but they do have bolt holes. I emailed ZL1 and they said don’t use holes. But what are the holes for then? ??*♂

Can anybody tell me if I have the right ones?

Sent from my iPhone using Tapatalk

 

So I received mine and can’t tell what goes where. They aren’t marked but they do have bolt holes. I emailed ZL1 and they said don’t use holes. But what are the holes for then? ����*♂

Can anybody tell me if I have the right ones?

Sent from my iPhone using Tapatalk

They did the fitment using my vehicle and they bolted the rears on at the bottom. As B5SRT stated the top one is the front.

 

I believe the top set goes in the front.


Sent from my iPhone using Tapatalk

 

Those look correct. On the bottom set for the rear of the truck the lower hole is used for the screw that is already in the fender.