I installed customer fitted seat covers! I have had my eye on this pri t for the longest! Held out on purchasing for my old SUV after I decided I was going to buy my Durango... I am loving it... my two boys... not so much lol! Oh well, she mine... all mine anyway!!!

 

Where did you find those? Need something to put on the middle row for the car seats to sit on.


--

2017 Dodge Durango AWD R/T Granite Blacktop

Performance
SRT Air Box, K&N Intake Tube, K&N Filter, Fastman 86mm TB, Ported Intake Manifold, 180° Thermostat, Billet Tech Catch Can, Corsa Catback, Grocery Getter Strut Brace, Diablosport Trinity, Jay Greene PCM/TCM Tune

Appearance/Interior
SRT Hood, Gorilla Black Lugs, Luxe Taillight Tint, Front Windows 15% Ceramic Tint, Yellow Fog Lights, Weather Tech Floor Liners, Mopar Grille Emblem, Steering Wheel AUX Buttons, Tazer

DiabloSport Trinity Times 0-60 5.17, 1/4 13.77​

 

I painted the calipers.

View attachment 97442

 

I used the workhorse to bring home another toy

 

I have a 2017 Durango that I have had for 8 mos. Has 3000 miles on it. Checked the oil today and found it 1 qt. low. The only explanation is they only put 5 qts. in at the factory. Added a qt. to bring it up to full. Will never trust the quality control again.

 

Your Durango only takes 5 quarts of oil. ?? Mine takes 7 quarts. ! You better check your owners manual again. ?

 

I think the V6 has less capacity.

 

Taken from the manual; the 3.6L V6 takes 6 quarts of oil, the V8 5.7L takes 7 quarts.

Sent from my SM-N950U using Tapatalk

 

I’ve got the v-6 which is 6 qts.

 

Finally got around to getting it tinted. I'm used to having tint on all my vehicles so I felt so naked driving the Durango.

Did the Llumar CTX Nano-ceramic. I normally get a different brand but decided to pony up the extra $$$$ this time.

Did 5% on back hatch and 15% on rear sides and doors. 35% on front doors (would love to have done 15% also but the cops know me already) and 5% Visor

View attachment 97674
View attachment 97682
View attachment 97690
View attachment 97698
View attachment 97706

 

Finally got around to getting it tinted. I'm used to having tint on all my vehicles so I felt so naked driving the Durango.

Did the Llumar CTX Nano-ceramic. I normally get a different brand but decided to pony up the extra $$$$ this time.

Did 5% on back hatch and 15% on rear sides and doors. 35% on front doors (would love to have done 15% also but the cops know me already) and 5% Visor

Was your car factory tinted or no? or you added tint to the factory tint?

 

It's not as dark as you would think. There was a new black crew cab Ram there when I dropped it off. They did 5% all around, including over the rear. On a bright sunny day, I couldn't see in the back window with my face against the glass!

 

1. Just added the cheapest SRT Brake and Gas Pedals from Amazon... (Great Quality BTW)...

2. Added my Weather Techs

3. Added Hubcentric 1.5” Wheel Spacers

4. And Finally, playing around with the placement and measurements for the 345 Badging. (Not officially putting the Badging on until I do the Brembo Brake upgrade).

 

Are you going to try and run the Brembos under the stock wheels with the spacers?

 

Made a pistol mount that isn't completely obnoxious, is easily accessible, secure, and doesn't require me to drill into any of the interior panels.

I started with one of my old Fobus paddle holsters that I never use. Chopped out everything I didn't need and filed down all the edges. Then I used some spare gopro mounting parts to make an adjustable and removable mount.

View attachment 97930

View attachment 97938

I wanted it where it was easily reachable, mostly concealed, and wouldn't hit my leg when the pistol isn't in it.

View attachment 97946

View attachment 97962

View attachment 97970

If you're wondering, that 3M VHB tape is good for about 90 lbs per square inch and there are several square inches there. Just gotta let it cure for about 45 mins before actually putting a load on it.

 

I installed a 2018 Durango SRT steering wheel into my 2014 Citadel. Minor tweaking to the wiring harness, and everything works including the wheel heat.

 

Did some de-badging, tinted the brake lights and got the catch can installed.

Sent from my iPhone using Tapatalk

 

Plastidip the wheels

before

after


2015 SXT
Sent from my iPhone using Tapatalk

 

Looks really nice, did you just take the wheels off the truck one at a time and do them or do it on the truck? I've been wanting to do this to mine but am just nervous of doing a horrible job.

 

Just had an x-pipe installed. I’ve got the Blastin Bobs 2.25” mufflers, and I think I might swap them out. It’s a little raspy above 4K rpm, but not too bad.

 

Got it washed and clayed yesterday. Waxing, cleaning out and detailing the interior, and cleaning the glass are on for today.

I swear this Durango is worse to clay than my Ram

 

Finally after 28 hours, the work is all done.


...until next year

 

Washed and waxed!

 

Upgraded the factory HIDs to Philips Whitevison Generation 2 5000K HIDs. The first one took me like an hour lol. There isn't much room and I wasn't 100% sure what I was doing. The second one took about 10 minutes max.

 

Any before/after pics?

 

Yes for now... It will clear. But eventually i'm changing the wheels all together. Going 24s!

 

Put my new custom plate on [emoji16]

Sent from my iPhone using Tapatalk

 

Perfect

 

I replaced my mid-muffler delete that had straight pipes. I ended up with Dynomax mini race bullets #24250 from Summit Racing. Now the raspy noise I had is mostly gone. I did this yesterday, just got the video finished of both setups.

Sent from my SM-N950U using Tapatalk

 

Is that without the resonators?

Edit: Just saw your other post explaining your setup. Nice, I have the same except Vibrant bullets.

 

Couple miles from Lake Geneva


Sent from my iPhone using Tapatalk

 

Put a Mercedes parking brake cover on.


Sent from my iPhone using Tapatalk

 

Spent the morning getting my GF's Gen 1 towed so I can do a radiator/water pump/belt/hose replacement on Monday.