[AdWo2187]

Hello All,

I changed to a Legmaker Intake and wanted to make sure my IAT sensor was oriented properly. I know on my Charger that it had to be facing a certain way, so I was wondering if anyone here knows if that's the case for the Durango, and if so, is mine correct? Thanks.

 

[Tin Foil Hat]

Check it on your old intake to see which way if faced when fully seated. The Legmaker should be keyed the same but maybe not. My AFE seemed to be and I don't have an issue with it.

 

[AdWo2187]

It’s just a circular hole so there’s no direction on the part of the sensor that plugs in to the intake

 

[Tin Foil Hat]

I'm not sure if it is directional or not. Maybe because the hole it just round, with a grommet I hope, it doesn't matter what the orientation is. If you're not getting any code or drivability issue then it's probably okay. Again, you can test it back in the original tube to see which way it faces in that.

 

[OurZoo]

I didn’t even think that could be an issue the way it’s mounted. I have the Legmaker as well. All I know is, I’m not pulling any codes and it’s registering the intake temp just fine.