Dodge Durango Forum banner
1 - 20 of 30 Posts

LDC2335

· Registered
Joined
·
102 Posts
Discussion starter · #1 · (Edited)
Not sure if build threads are allowed. If not please delete. Thought I'd consolidate and reference any work I do to help others.

Favorite quote.. Spending money I don't have, on mods I don't need, to impress people I don't know. [emoji23]

Here goes. 2019 R/T Blacktop (it's the wife's daily driver)

1. Window tint - 20% Madico black pearl ceramic Ir film

2. 345 hemi fender badges - https://www.amazon.com/dp/B07K29V6QT?ref=ppx_pop_mob_ap_share

3. R/T Emblem Overlay Decal -https://www.amazon.com/dp/B01M9IRK8W?ref=ppx_pop_mob_ap_share

4. Custom Carbon Fiber Intake/K&N Filter

-- Carbon fiber 4" tube - https://www.amazon.com/dp/B074K7G3S9/ref=cm_sw_r_cp_apa_i_2nSsDbT5RHX52

-- 4" straight hump coupler
-- 3.5" to 4" 90 Degree coupler
-- 1" od/1/2" ID grommet for IAT sensor
-- K&N drop in filter 33-2457

5. Adam's Ceramic Paint Coating - 9H - https://www.amazon.com/dp/B01NA7LKEO?ref=ppx_pop_mob_ap_share

6. Exhaust tips - Flowmaster Double wall 4" 15396 2.50" Inlet Polished Stainless Steel Angle Cut Exhaust Tip - Amazon.com: Flowmaster (15396) 3.50" Polished Stainless Steel Angle Cut Exhaust Tip: Automotive

7. MGP 12204SRT1RD - Gloss Red Caliper Covers with RT Engraving

8. Front LED turn signals - JDM ASTAR 2600 Lumens... - (no resistor needed, no hyper flash) - https://www.amazon.com/dp/B07CGDNJRT?ref=ppx_pop_mob_ap_share

9. Reverse Led bulbs 4ea X 1550 Lumens... https://www.amazon.com/dp/B01LX4FMD1?ref=ppx_pop_mob_ap_share

10. Moroso 85613 Air/Oil Separator, Black https://www.amazon.com/dp/B00G8ZGG86/ref=cm_sw_r_cp_apa_i_zLSsDbZ7WN5JF

11. 8.4" Uconnect Screen Protector (love the feel of it. Feels like a real tablet screen) I do wish it was a few mm bigger. https://www.amazon.com/dp/B073JPP68M?ref=ppx_pop_mob_ap_share




Image
Image
Image
Image
Image
Image

Image


Gif.. Click me
Image


Gif.. Click me
Image


Gif... Click me
Image

Image

108988

Image
 
Discussion starter · #6 ·
For some reason I can't edit and add to the original post. That sucks. For now I'll post here.

Added SRT style pedals. I can't belive how inexpensive these were and they are very similar.



Image
Image


Sent from my Galaxy S10+ using Tapatalk
 
Discussion starter · #16 ·
Love this thread. Thanks for sharing!! Some nice simple and slick upgrades. I’ll be copying some.

Do you notice any difference with the intake setup you made?
Not life changing, but without a tune most intakes aren't.

It's definitely got some better throttle response and the sound is just right. Nice grunt to it.
 
Sorry, I gotta ask. Where did you drill for the IAT sensor location? In the carbon fiber intake? Also, did you have to trim the 90 degree elbow at the port? Was there a gap mismatch at the air box where you placed the 4" hump connector? I'm about to try this myself and was wondering if it'd be better to put the IAT sensor at the top of the airbox instead of the carbon fiber tube.
 

Attachments

So I've emulated your build and like the results alot. The only thing i deviated at was placement of the IAT sensor. By moving that to the airbox top hat (as far away from the engine block as possible) I'm reading near ambient air temps and getting better gas mileage. 2-3 mpg to be ballpark. The look, results, and savings were enough for me to make this mod with it. Thanks for your help!
 

Attachments

1 - 20 of 30 Posts