Dodge Durango Forum banner
Cancel
Create thread New Garage Forums

Z1 Addons Rock Guards Help !

Jump to Latest
21 - 40 of 70 Posts
#24 · (Edited)
I have these installed on my dsrt as well. Good fitment. I went an little extra and added some double sided tape to the inside of the guards along with the clips just to be safe. So far they are holding up. Very good product. Very subtle look to them. They are not bulky and don't protrude out a lot but still offer a decent amount of coverage. And I like how they follow the flow of the fender well. ????
 
#25 ·
How loose are the clips once installed? I’m trying install these now and I’m not sure I received he right ones. The clips are loose once installed. Also I had to turn them in a good bit just to get the clips to reach the flap
Image
Image



Sent from my iPhone using Tapatalk
 
#27 ·
My clips were very tight, almost hard to put on they were so tight.

I’m not sure you got the right rock guards unless they are a new style. Mine don’t have all those cut ins like yours and cover the entire painted part inside the fender.
 
#30 ·
EMS-Pilot said:
It looks like you put them on the wrong wheels. It looks to me like you put the front ones on the back. Take a look at mine and how they fit.

View attachment 98593 View attachment 98601 View attachment 98609 View attachment 98593 View attachment 98601 View attachment 98609
Click to expand...

They are marked front and rear. The ones on the rear are the widest of the two. The front set is even narrower. I’ll give them a call today.
Thanks all for the input. [emoji16]


Sent from my iPhone using Tapatalk
 
#32 ·
burn133 said:
I also think you have the wrong ones. The ones I have look different, and I got mine two weeks ago. They are for a 18 DD RT.
Click to expand...
Any pictures of them on the RT?


--
2017 Dodge Durango AWD R/T Granite Blacktop

Performance
SRT Air Box, K&N Intake Tube, K&N Filter, Fastman 86mm TB, Ported Intake Manifold, 180° Thermostat, Billet Tech Catch Can, Corsa Catback, Grocery Getter Strut Brace, Diablosport Trinity, Jay Greene PCM/TCM Tune

DiabloSport Trinity Times 0-60 5.17, 1/4 13.77​
 
#35 ·
So I received mine and can’t tell what goes where. They aren’t marked but they do have bolt holes. I emailed ZL1 and they said don’t use holes. But what are the holes for then? ??*♂

Can anybody tell me if I have the right ones?
Image



Sent from my iPhone using Tapatalk
 
#38 ·
DuvShack said:
So I received mine and can’t tell what goes where. They aren’t marked but they do have bolt holes. I emailed ZL1 and they said don’t use holes. But what are the holes for then? ����*♂

Can anybody tell me if I have the right ones?
Image



Sent from my iPhone using Tapatalk
Click to expand...
They did the fitment using my vehicle and they bolted the rears on at the bottom. As B5SRT stated the top one is the front.
 
#40 ·
hermajesty71 said:
I think they look good. Pretty inconspicuous as you mentioned. I hadn't planned on getting them myself really but he stuck them on so there they are lol. I'm really hoping they help minimize the road grime there on the fender. Its a mess ll the time. I got a white one so it would look clean longer lol after having a black car the last 10 yrs. Kidding myself there! I think the dude that makes them was going to list them for all Durangos from 2014 and up I think he said. They just clip on. They are not molded.
Click to expand...
Have you noticed a difference with the guards on? With these 295s sitting so wide out the fenders they really throw any grime up from the road onto the doors. Hoping these would help.
 
21 - 40 of 70 Posts
About this Discussion
69 Replies
24 Participants
Last post:
ZPirate
Dodge Durango Forum
posts
509K
members
60K
Since
2004
Welcome to the best Dodge Durango Forum around, where you can find a great Dodge Durango Wiki and discuss the reliability of the different trim levels including the GT and SRT!
Full Forum Listing
Explore Our Forums
Durango Discussions 2014+ Durango Discussions 1998-03 Durango Discussions Dodge Durango 2018+ SRT and Hellcat Durango Purchasing