[maxwelld9]

Picked these up Tuesday, I really like the center caps on the shaker.
View attachment 48321
So I picked up these in Matte/chrome, and also have some in the works gloss black/jazz blue
View attachment 48329
They are a 3 piece design the base, the rombus, then the top that the rombus pokes through.

Should be fixed

Where did you get these? Looks great btw.

 

[bcrystlazrt]

Does anyone know how to take the fog lights out? I have some lamin-x yellow tint film .. its a pain in the rear to put them on the fog lights.

 

[Bryali]

Does anyone know how to take the fog lights out? I have some lamin-x yellow tint film .. its a pain in the rear to put them on the fog lights.

They pop in from behind the bumper and a couple tabs hold them on. I think there is 1 on top and 1 on bottom of each light?

Get up under there and you'll see the tabs sliding through a ring that goes around the fog light assembly.

Pry 1 tab out and the whole assembly will let go. It's pretty easy once you figure it out.


Sent from my iPhone using Tapatalk

 

[DrDurangoTx]

Rainy day here in Southern California so decided to install the new front grille...

You got some daylight pictures detailing the mesh?

 

[Willcnfo]

Interesting! I comment on how bright it is inside my wife's Focus vs the DD every time I get in her car. I may have to look at this. Did you do the regular or premium kit?

I got a kit from www.superbrightleds.com. I could only swap the incandescent bulbs in the larger map/courtesy lights. I also swapped out the old LED dome light in my Mustang with a bulb from these guys and it is way brighter than the previous LED. In total, I swapped 6 bulbs in the D, two front, two middle, two cargo area.

 

[1BADR/T]

Ordered new vanity plates: "MEGTRON"

 

[bohic]

Little fun before the snow.


Sent from my iPhone using Tapatalk

 

[caskey_b]

Blacktopped my Limited

 

[BigAl]

You got some daylight pictures detailing the mesh?

Sorry only have a crappy cellphone camera this is the best i can get

 

[maxwelld9]

About a week late posting this but tinted the front and installed pedals.

 

[havoc]

Sorry only have a crappy cellphone camera this is the best i can get

Is this custom? Where can I get one?

Edit...NM, found it.

 

[BigAl]

Is this custom? Where can I get one?

Edit...NM, found it.

Yup just know the grille shell and the part that connects under the hood is one part made of fiberglass. Not the best design if you ask me but it gives me time to slowly modify the stock grille the way I want.

 

[howiestt]

BigAl show some more pics of the grill, open the hood up to show what you mean. Did you have to adjust anything when installing?


Sent from my iPhone using Tapatalk

 

[DrDurangoTx]

Sorry only have a crappy cellphone camera this is the best i can get

Yeah... these guys did a dollar store quality type of job on mine, and I spent many days with my wife fixing it. That company can eat it. Thanks for sharing. Good mesh pattern. You did your own correct?

 

[BigAl]

BigAl show some more pics of the grill, open the hood up to show what you mean. Did you have to adjust anything when installing?


Sent from my iPhone using Tapatalk

No adjustments needed I can see over time having issues with the fiberglass cracking which is my concern with the design

 

[BigAl]

Yeah... these guys did a dollar store quality type of job on mine, and I spent many days with my wife fixing it. That company can eat it. Thanks for sharing. Good mesh pattern. You did your own correct?

Yeah i did the lower grille months ago and had the mesh sitting around..

I already started on my own grille modifying the stock shell.. more pics to come on that adventure!

 

[DrDurangoTx]

Yeah i did the lower grille months ago and had the mesh sitting around..

I already started on my own grille modifying the stock shell.. more pics to come on that adventure!

Did you do the lower as well? That's the big test to figure out and deploy factoring in the camera.

We did the stock shell already, fibered the cut sections and are fine tuning it.

 

[BigAl]

Did you do the lower as well? That's the big test to figure out and deploy factoring in the camera.

We did the stock shell already, fibered the cut sections and are fine tuning it.

I was able to do the lower as well just removed the stock grille section and cut the mesh to fit. the fascia has tabs coming off I made slots in the mesh for them and used clips I had laying around for the SRT magnum grille.

Just started the stock shell using all plastic from the center cross hairs, so far its turning out as planned but still in the beginning of the process.

 

[howiestt]

BigAl I'll buy your Sarona grill when you finish this one!! Lol


Sent from my iPhone using Tapatalk

 

[BigAl]

BigAl I'll buy your Sarona grill when you finish this one!! Lol


Sent from my iPhone using Tapatalk

that works as long as I get this one to the point I like