Dodge Durango Forum banner

WTB - OEM DD SRT Rear Resonators

8.4K views 32 replies 11 participants last post by  wstevensoniv  
#1 ·
Interested in only the resonators, and tips if they’re still connected but really only want the resonators. I’m by Disneyland but down to pay for shipping etc if you’re able to package them.

Must be factory parts from an 18, 19, or 20 Durango SRT please with the large 2.75” inlet please (no RT pieces). Hit me up, -Dan
 
#8 ·
See vids here, will post more as time allows!

 
#11 ·
Hey Dan, can you give me the PN off the two resonators. I might have found some Jeep SRT resonators which should swap over but I want to make sure the PNs are the same. Hopefully you saw them in a photo or took a photo.

Thanks.
 
#13 ·
I think you're right because I see 8954L which is not the number of the GC SRT left resonator. It might be more due to the shape though I thought that GC and Durango exhaust systems were pretty comparable. Have you read somewhere that the Jeep SRTs were quieter than DD SRTs?
 
#16 ·
I may have a pair for you if I am able to get the exhaust system I am looking at getting right now. I will know by next week.
 
  • Like
Reactions: Mandos18
#18 ·
He sold them to DusterDan.
 
#20 ·
Beware of any Zelle payments. You will have no recourse against Zelle if the seller rips you off or the payment "goes to the wrong place." You also need to confirm the part number on the resonators. SRT resonators have 8954L on one and and the other is 8953R I believe, or something close.
 
This post has been deleted
#25 ·
All of the Colton posts lead me to believe both are spamming us. "I do buy part from them" (poor english), send half, send shipping fees, etc. All the marks of a scammer.
 
#28 ·
The resonators are the same on all SRTs as far as I know. You should have one welded on on the passenger side and bolted on on the driver side. The PNs on SRT resonators are 8954L and 8954R and they are visible from the bottom of each resonator. The only issue would be that the inlet pipe is larger on the SRT resonator so you would need reducers to hook them up as Dan did. The tips are larger 4" tips so they look good too.
 
#32 ·
Wow, more spam posts on an old thread that was completed months ago. One guy not even blocked from before.