Dodge Durango Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I have a weird issue with my starter.
As soon as I turn the vehicle to the on position it turns on I don’t even have to go to start. And the starter just stays on and won’t shut off until I put it in drive. I have 2 CEL codes p1389 and p1768.

I have replaced the ignition switch and cylinder

the relays for the auto shut down and the starter.

and reseated and cleaned the PCM connectors also reset it.

the only thing I can think of is a issue with the shifter going into park or the PCM has gone faulty.

any help would be appreciated also if this is in the wrong area I am sorry I’m new here.
 

·
Registered
Joined
·
1 Posts
Yes i have a similar issue:
2014 durango hemi.

Occasionally, When i push button to start, the starter
continues to turn over but engine does not crank.The only way to stop the starter is to put it in any other gear.
I have to contuine this several times until it finally cranks.
Guy at local Dodge dealer
said put in a fuel additive at every fill up.
??
Just the 2 of us have this problem?
 

·
Registered
Joined
·
7 Posts
Anyone get to the bottom of this?, I have the same issue with my 06 Durango 5.7L
Cranks in the on position, with a new PCM
 
1 - 6 of 6 Posts
Top