Dodge Durango Forum banner

Seat Swap question

3K views 2 replies 2 participants last post by  Magnum3672 
#1 ·
I have an 09 base trim model Durango and I kind of want to swap out at least the drivers seat (possibly front passenger seat too depending on what I find) because the base model seats are kind of uncomfortable to me and the drivers seat is torn a bit.

If I was able to find a seat from a higher trim model with all the electrics and whatnot instead of mechanical movement, are the plugs for that already installed on the base trim, but not attached because the seat isn't compatible?


That's a lot of mush, basically I'm just asking if I buy a higher trim seat with electronic adjustment how big of a PITA is it to install?


Thanks!
 
#2 ·
It's possible all the plugs are there, but I wouldn't bet on it. You can always run a power wire to run the seats though. I added a power passenger seat to my 06 Magnum, the plug was not there so I ran a power and ground wire. Simple enough.

Sent from my Pixel 3 XL using Tapatalk
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top