[Volphin]

P1294

Mark this seldom used code indicates that the D is being driven too gently. Quit driving like an old woman and use that SC. Geeez.

JK man,

Symptom:
P1294-Target Idle Not Reached

When Monitored
With the engine idling and in drive, if automatic. There mustn't be a MAP sensor trouble code or a throttle position sensor trouble code.

Set Condition
Engine idle isn't within 200 rpm above or 100 rpm below target idle for 14 seconds. Three separate failures are required to set a bad trip. Two bad trips are required to set the code.

Possible Causes
* Throttle plates/linkage binding
* Vacuum leak
* Throttle body
* Throttle body dirty

HTH

Bill

 

[Volphin]

Carb Cleaner

I'd remove it and give it a good spraying. Carb cleaner won't damage your gaskets though if you want to clean it installed.

Bill