The SRT/10 has a buldge in the hood so I think you'd need to add a new center section for that to work. It'd probably be easier, as well as cheaper, to just buy the SRT/10 hood from Moore Products. You can get it already open to the inside and connect it to your intake or leave it closed and re-route a new opening to where you want it to go.

 

I don't believe the SRT10 scoop is available by itself, however they do sell the entire hood for Ram owners wanting to switch. It costs less than $600 so very respectably priced, especially when copmpared to our D's aftermarket hood prices.

As far as our D hoods, assuming the other Ram scoop will fit the D's curves and lines (like DurRT's Mustang scoop did so nicely) you can get just the scoop at Dodgeparts.com for under $300

HTH,

IndyDurango

 

Thanks a lot guys for your help. I think I'm going to see if I can get some dimensions of the scoop itself, and see if and how it'll fit. Thanks for the links and your time, Duke.

 

Thanks a lot guys for your help. I think I'm going to see if I can get some dimensions of the scoop itself, and see if and how it'll fit. Thanks for the links and your time, Duke.

No problem. I come across this stuff just looking around for myself and wham, someone asks about it here on the forum. Happy to help.

IndyD