Dodge Durango Forum banner
Status
Not open for further replies.

Group buy on PPH Headers for 4X4 D's

85K views 272 replies 31 participants last post by  FSTDANGO3  
#1 ·
Lets get this rolling. There seems to be an interest on starting a new order. We'll need 15 before we can get Mike to make a new run. The exact Details will follow once I contact him and finish the setup, but the first thing I need is 15 commitments.

I have these on my 5.9 from the last group buy. They're great. I had no install issues on mine. Fit was good and I installed them myself. I only needed to have a local shop weld the collector on for me after it was all installed.

This will be set up as the last one was. I'll supply your name and address to Mike and you'll pay him directly. No money will be made by me and I won't handle any of it. you'll make all of your arrangements for delivery and payments through Mike (or Pam) so it keeps everything on the even. I'll just facilitate it for you all. It worked out fine last time. As soon as we get close to the number, I'll let them know we're close so they can plan and when we get the required 15 orders, we can kick it off. I'll try and get other Forums involved so we can hit the number faster and maybe get even more and work out a price advantage if that's the case. No promises on that.

I'll send off an Email to them now and get prices and other details and post them later when I get it but for now we need to show Mike we have the orders or it doesn't matter.

Start the list below. Add your name and let's get this moving along. check about 6 links down to the last GB so you can all see the questions and answers to pre-empt any questions you might have.

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.

Dwayne Messerschmidt NEDOC-CL
 
#54 ·
not to get off topic but I love my D but the V8 Xc90 is a much superior car. My dad has one and I drive em both.

I CANT WAIT to get these headers though!
 
Save
#57 ·
macfights said:
next question is? will they ship to an APO?
mleachcopam@aol.com

send an email to the addy above and ask them your questions. they'll be happy to answer them for you. let them know you asking in regards to the Header group buy going on at the DOC.

Please report back when you get an answer so we can all benefit, Thanks.

And I agree, lets keep the post to questions regarding the group Buy.

Any more takers? we only need a few more, People?
 
#61 ·
1. Rod Perryman
2. Andreas de Freitas (Adde)
3. Jonathan Harris (technec)
4. Ron Glenn (DCDAD)
5. Gary Cull (Black Magic)
6. Mark Knapcik (Axiom)
7. Phil Ridenour (Dangcold)
8. Steve Eddingfield (01_EOD/R/T)
9.
10.
11.
12.
13.
14.
15.

Alright I'm adding my name to the list?any way to get some more solid info on the headers? I emailed a week ago and didn't get a response.
 
Save
#62 ·
Well

The Headers are Mike Leach Headers they're long Tube they're the same as previuosly produced Mopar PPH headers I believe
In Short
I hear they're the best headers PERIOD for the 5.2 and 5.9 both in fitment and performance
Steve
DOC Pres
 
#63 ·
Thanks, Steve! They look good to me, so I'm signed up and ready when some more takers grab hold out there.
 
Save
#64 ·
They're made to order so 7 more sets to get the ball rolling
Steve
DOC Pres
 
#66 ·
Well

Unless one of you wants to buy 7 extra sets and resll them elsewhere for a profit but it's a lot of Money to lay out :cheesy:
Steve
DOC Pres
 
#69 ·
Save
#72 ·
due to the fluctuating prices in steel, I can't get a firm price until we get the required number of takers. it should be in the ballpark of last time but I can't get an exact quote yet since we don't have the numbers to back up the quote.

hang in there and if you're interested, get your name on the list if it's not already and we can get this GB rolling.
 
#74 ·
murnutz said:
Skitzo.d,
You can count me in pending price. I could go for $599. I assume no probs with 5.2L 4x4 and these heaters are to be ceramic coated and include y-pipe?
I got an email from Pam and just spoke with Mike at PPH a couple hours ago and got the scoop on these suckers. They're professionally ceramic coated stainless steel, complete with all gaskets and bolts and will fit without any modifcations on the 5.2 and 5.9 4x4/AWD models. They include a new Y-pipe that fits directly to your existing exhaust and they do carry a warranty. The price is $599 from what they said, they just need a firm 15 or more to lock it in, start production and we're good to go.
 
Save
#75 ·
guys sign up on the list its not gonna go faster cuz you guys say oh I'll sign up once it's close the more the sign up the faster it'll go
 
Save
#76 ·
. Rod Perryman
2. Andreas de Freitas (Adde)
3. Jonathan Harris (technec)
4. Ron Glenn (DCDAD)
5. Gary Cull (Black Magic)
6. Mark Knapcik (Axiom)
7. Phil Ridenour (Dangcold)
8. Steve Eddingfield (01_EOD/R/T)
9. Mark Murray (Murnutz)
10.
11.
12.
13.
14.
15.

Okay I'm officially in now.
 
Status
Not open for further replies.
You have insufficient privileges to reply here.