2004 Durango SLT 5.7 - Front blower not working. Replaced resistor (was melted badly). Checked fuses and relay, all checked out good (if I found all of them). But I checked ALL fuses and they seem to be all working. I have no power to resistor. Also, I have no power to the switch in the dash that controls the front blower speed. There is power to the rear switch to control rear fan setting, and rear heat does work. There is power at the blower motor relay under the hood. But that seems to be where it stops. What am I missing? In-line fuse? Any ideas would be greatly appreciated. Thank you. Please don't post comments to replace resistor. Did that. Blower/Fan is also good as well.