Hi Guys
So when I was wanting to just install the rear JGC springs there was limited information and it was in pieces so I thought this might be a good idea to start this thread. So in this post you will find pics of the springs, pics of the model # on the springs and a photo from my body shop doing a before and after. I have 22" Viper Reps and my tires are a 285/45/22 Hankook Ventus, Truck is a 2015 R/T Black Top. Very important to note that Eibach makes two spring sets, one for the SRT (Not the one I used) and one for the regular V8 JGC (The ones I used). The part number to the spring set is 28108.540, however if you call them directly you can order just the rear springs for $172.00 total including shipping. The part number for JUST the rear springs is 28108.002 (See picture below). The drop looks great from the one picture the body shop sent but once I get the car back I will take plenty more pics and I will also try and video tape the drive up-close from the outside (using my drone) to show travel, rub, etc...Also with the Drone, I can get 4K video from all around the car so you can see it from every angle. Hopefully this helps anyone else doing the same thing because everything was really unclear when I had to do it and I had no real idea how it would turn out. OK, I will keep you guys updated. I am told I will have the car in less than 2 weeks. Feel free to ask any questions as I am specifically documenting things as much as I can for this Forum.
![]()
![]()
![]()
So when I was wanting to just install the rear JGC springs there was limited information and it was in pieces so I thought this might be a good idea to start this thread. So in this post you will find pics of the springs, pics of the model # on the springs and a photo from my body shop doing a before and after. I have 22" Viper Reps and my tires are a 285/45/22 Hankook Ventus, Truck is a 2015 R/T Black Top. Very important to note that Eibach makes two spring sets, one for the SRT (Not the one I used) and one for the regular V8 JGC (The ones I used). The part number to the spring set is 28108.540, however if you call them directly you can order just the rear springs for $172.00 total including shipping. The part number for JUST the rear springs is 28108.002 (See picture below). The drop looks great from the one picture the body shop sent but once I get the car back I will take plenty more pics and I will also try and video tape the drive up-close from the outside (using my drone) to show travel, rub, etc...Also with the Drone, I can get 4K video from all around the car so you can see it from every angle. Hopefully this helps anyone else doing the same thing because everything was really unclear when I had to do it and I had no real idea how it would turn out. OK, I will keep you guys updated. I am told I will have the car in less than 2 weeks. Feel free to ask any questions as I am specifically documenting things as much as I can for this Forum.
