Dodge Durango Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
hello long time listener first time poster.

started with search button didn't find what i wanted.

My wife has a 2016 limited with 20" wheels. just purchased used 18" jeep wheels without tpms sensors for a winter wheel/tire set up. I would like to get aftermarket sensors but do not want to put them in and out more then once just to save 60$. Has anyone had experience, with a certain set of sensors that will work first try? Or shall i just get factory units for $120 that i know will work first try.


these are the wheels I got on craigslist from my research they should fit ok at ET44
http://www.hubcaphaven.com/mm5/graphics/00000001/aly9076sp_lg.jpg

The factory part number for the sensors is 68313387ab for 2016 D Limited
most of the ebay or amazon aftermarket ones i have do not list above as may work for oe pn.
 

·
Registered
Joined
·
4,728 Posts
I think that is a good move.
I bought a used set of OEM from a recycler that has worked out well....but note they do have batteries so you want a fresh set to get max life from them...which seems to be around 10 yrs on ave. depending upon your climate.
 
1 - 3 of 3 Posts
Top