The 392 emblem on the SRT is 5 1/2" down from the fender crease and 2 9/16" from the front door gap.

 

I was wondering if you knew where to place the RT on the rear door hatch.

 

Thank you. That was easy!

 

You're welcome!

 

Do you have a picture of the emblem? Where’d you get it


Sent from my iPad using Tapatalk

 

Search 345 hemi badge on eBay or Amazon.

 

Here you go......got mine on Amazon

 

Thank you both


Sent from my iPad using Tapatalk

 

Awesome! Thanks I was looking at getting some badges as well.

 

Man I just put mine on the day before this post. At least I was close - 7 inches below and 2 inches over. Not bad for eye ballin I guess.

 

If you're gonna add the Hemi under it here's a picture. It's the same distance as a piece of corrugated cardboard. The Cardboard also acts as a guide.


I used the ones on a 392 card as a templet.

Sent from my iPhone using Tapatalk

 

This is the fender badge I want to get made. I hand drew the skull based on the same design as the hellcat and demon.

 

This is the fender badge I want to get made. I hand drew the skull based on the same design as the hellcat and demon. View attachment 89841

Get hold of the cat at rebadge. He might be able to make them for you.

 

Great post nice info share amongst members

 

Looking at these on Amazon, but it appears there is no transfer tape on the front of the badge (or perhaps they removed it to take the pictures.
For those who have purchased & applied these, how did you keep the numbers & lettering spaced correctly after removing the backing ?

 

Buy the cheapest set you can find eBay or amazon. eBay has more options. Cause they all come from China and are all the same. When you get them peal the CHEAP foam tape off of them and put on some quality 3M automotive tape on them. It will be gray with red backing. You can find it at auto parts stores and even Walmart. Trust me on this one as the stuff that comes on them is complete garbage.

As far had how to keep them spaced you'll make a tape box sized off of the HEMI part of the badge. this will give you an ideal of how to keep the 345 spaced.

Sent from my iPhone using Tapatalk

 

Yeah, the sides need something, especially with a white one like mine. Just seems like a giant billboard waiting for something to be posted - LOL.

 

And another thing about placement since something jogged my memory this morning.

This is a picture of the call out on a SRT Charger on the showroom floor of the dealer I bought my truck from. I actually took the picture.

This is the picture that the Chinese guy, who's never seen a real HEMI car in his life took of the 345 HEMI call out so he could sell it to you on eBay.

See the difference in how the numbers and the HEMI are aligned??? Just sayin

 

And another thing about placement since something jogged my memory this morning.

This is a picture of the call out on a SRT Charger on the showroom floor of the dealer I bought my truck from. I actually took the picture.

View attachment 91626

This is the picture that the Chinese guy, who's never seen a real HEMI car in his life took of the 345 HEMI call out so he could sell it to you on eBay.

View attachment 91634

See the difference in how the numbers and the HEMI are aligned??? Just sayin

Fixing the alignment is SIMPLE. The badge comes as a complete sheet with the numbers and “hemi” laser cut. Remove the word hemi first. Then remove the backing to expose the adhesive of JUST the 345. Locate the placement on the vehicle and adhere. Apply pressure to the numbers and remove the excess foam around them (which did not stick because you left the backing on). Once the numbers are in place align the angled edge of the 3 to match the angle of the H(emi)

 

I purchased that same emblem


Sent from my iPhone using Tapatalk

 

Got mine in, going on the R/T today ... I think, if the weather will give us a break for a day.

Went with the Amazon versions (in metal), got the placement measurement, the 3 and H alignment (I gently cut the two while the backing was still on).

Should have a cargo mat coming today too, will post pics later.

 

Yes it does ...

 

I know this an old post but I thought I would share how I put my badges on and got everything lined up. I used masking tape and lined a pice up with the angle of the 3 on the end then set the HEMI badge below it. Hope this helps.