Dodge Durango Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
OK just looking for info on what all needs to be changed when I swap my 318 to 360 like pcm, computer, or harnesses. Just need to know what all I have to get to swap out or whats interchangeable and will bolt right up to the 360.
111831
 

·
Super Moderator
Joined
·
13,065 Posts
IIRC if you stay with the same year the engine harness and PCM are the same.

Also IIRC you need a new torque converter because the 318 is internally balanced and the 360 is externally balanced.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
IIRC if you stay with the same year the engine harness and PCM are the same.

Also IIRC you need a new torque converter because the 318 is internally balanced and the 360 is externally balanced.
Awesome thank you. That's what I was told about the same year but didn't know how accurate it was. Your a blessing with the speedy response. Will get into it and do a bit more research but guess as long as I get the same year it won't be a real headache since the pcm and harnesses would work. Will be updated with the 360 soon
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top