Right after getting my 2022 DD that had the wireless charging console, I found it to be the worst feature ever on an otherwise outstanding vehicle. With the phone I had, it wouldn't work at all with the factory rubber mat, and if I removed the mat it would only provide slow charge and the phone would slide around. Completely useless, especially as you're not supposed to place keys or wallet or whatever on top of it either. I've had a new phone since purchase that would work with the mat, as would my daughter's iPhone, but still slow charge only. I started ordering the parts as the first of the year, and was going to do it myself, but with everything else I have going on I, gave in and had the dealer remove it because I just couldn't take it anymore. I don't know how else to describe it, other than life changing (ok, I'm being a bit facetious), to have that space reclaimed!
If anyone wants to do it, there are three parts needed. The non-charging console bin (Part # I used is 68520042AA), the non-charging rubber mat (Part # I used is 68520040AA), and the console inner bezel (the inner plastic peace on the right side), which is dependent on your interior trim accent. For example, my build sheet lists the Apex Hydro Interior Accent. You will want to confirm what interior accent you have and get the appropriate non-charging console part, this was the most expensive part. For my Apex Hydro interior accent, the part # was 6WT79AAAAA. With the non-charging center console, I was able to order ProClip USA's console mount for my phone (it uses the non-charging inner bezel to mount) as it is easy and quick to install and remove as needed.
![Image]()
Here are pics of the before (with my rubber part of the mat cut out to get it to work), after, and the ridiculousness of the space the factory wireless charger uses up/wastes. There are pics showing my sunglasses to show the size and how useless the left over space on the wireless charger bin is versus a comparison with the non-charging bin and my sunglasses. As you can see in the pictures of the removed charging bin, the wireless charger could easily have been rotated 90 degrees for mounting to have provided at least some extra storage space in the console.
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
If anyone wants to do it, there are three parts needed. The non-charging console bin (Part # I used is 68520042AA), the non-charging rubber mat (Part # I used is 68520040AA), and the console inner bezel (the inner plastic peace on the right side), which is dependent on your interior trim accent. For example, my build sheet lists the Apex Hydro Interior Accent. You will want to confirm what interior accent you have and get the appropriate non-charging console part, this was the most expensive part. For my Apex Hydro interior accent, the part # was 6WT79AAAAA. With the non-charging center console, I was able to order ProClip USA's console mount for my phone (it uses the non-charging inner bezel to mount) as it is easy and quick to install and remove as needed.
Here are pics of the before (with my rubber part of the mat cut out to get it to work), after, and the ridiculousness of the space the factory wireless charger uses up/wastes. There are pics showing my sunglasses to show the size and how useless the left over space on the wireless charger bin is versus a comparison with the non-charging bin and my sunglasses. As you can see in the pictures of the removed charging bin, the wireless charger could easily have been rotated 90 degrees for mounting to have provided at least some extra storage space in the console.
