[macfan82]

Black DODGE letters for the liftgate.

Sent from my iPhone using Tapatalk

should mine have been bubble letters like the originals just in black? Because what I receive are just flat block letters.

 

[awehlage]

should mine have been bubble letters like the originals just in black? Because what I receive are just flat block letters.

Those don’t look correct…


Sent from my iPhone using Tapatalk

 

[macfan82]

Those don’t look correct…


Sent from my iPhone using Tapatalk

Right. That is what I am thinking too. I do not want flat black lettering badge inlays. WTF. I emailed them lets see what they say. Came all in a little baggie all stuck together. Can't imagine Mopar approving that lol. Your Durango looks freaking awesome BTW. Do you have a link for that hood protector? I have a 2020 DDRT in destroyer gray not sure how that will look but definitely interested.

 

[macfan82]

Those don’t look correct…


Sent from my iPhone using Tapatalk

They just emailed me back and they are now doing an acrylic deeper one for more of a OEM look but can still do the Gel domed style like what you have. How is holding up. Did it feel like a gel letter?

 

[awehlage]

They just emailed me back and they are now doing an acrylic deeper one for more of a OEM look but can still do the Gel domed style like what you have. How is holding up. Did it feel like a gel letter?

It’s holding up great. I did a thorough cleaning before installing with isopropyl alcohol. Yes, they are more of a gel than a hard plastic.


Sent from my iPhone using Tapatalk

 

[macfan82]

Lower lip matte red hash marks

Sent from my iPhone using Tapatalk

Where did you get the lower lip hashmarks from?

 

[awehlage]

Where did you get the lower lip hashmarks from?

Cut them myself to the desired width and length. Just ordered a whole sheet of 12” x 24” matte red vinyl.


Sent from my iPhone using Tapatalk

 

[LIDurangoRT]

I followed Andrew's thread and did the same, but used Grey.

 

[macfan82]

I followed Andrew's thread and did the same, but used Grey. View attachment 120318
View attachment 120319

Looks awesome!

 

[LIDurangoRT]

Thanks Mac. I originally did red, same as Andrew but the red hash center caps on my wheels started to fade from the sun after a year so I went to the grey and luckily been fine.

The red pops though especially on the black.

 

[macfan82]

Did the sway bar come with the new red stabilizer bushings?

 

[awehlage]

Did the sway bar come with the new red stabilizer bushings?

No black. I ordered red ones.


Sent from my iPhone using Tapatalk

 

[awehlage]

Out with the old…

In with the new…
•Soundqubed HDS3.2 - 12” DVC 4ohm (1,200W RMS each)
•Soundstream ta1.3000d wired to 1ohm
•Skar SK2X12V Dual ported enclosure
•PowerBass SWX‑12G grills
•Pioneer GM-D8604 for the center channel, front doors, rear doors and rear c pillars

Quick disconnect on the subwoofer speaker leads so I can easily take the loaded enclosure out when hauling the family around.

Sent from my iPhone using Tapatalk

 

[awehlage]

Also jumped on the TAZER bandwagon to enable mostly live features the OBDJScan app is not capable of like:

•Auto fold the power folding side view mirrors with the ignition on and off
•Enable Sport mode upon engine startup automatically
•Linelock/launch control

Placed the TAZER in the side of the dash with an OBD2 splitter so the OBD2 port under the dash is still free

Sent from my iPhone using Tapatalk

 

[Centex16]

I’m loving that sub setup. I’ve got a single 12” JL shallow for the moment but it’s lacking compared to how it sounded in my charger. Might be time for an upgrade.

 

[awehlage]

I’m loving that sub setup. I’ve got a single 12” JL shallow for the moment but it’s lacking compared to how it sounded in my charger. Might be time for an upgrade.

The Skar 12” shallow sub in a sealed box sounded great….except sometimes I need to feel my brain rattle for therapeutic reasons


Sent from my iPhone using Tapatalk

 

[awehlage]

This is my 4th pair of aftermarket license plate LED lights (all replaced under warranty). They eventually burn out because the factory electrical socket is loose in the aftermarket housing and allows water to enter short circuiting the PCB.

Clear epoxy for the win

Sent from my iPhone using Tapatalk

 

[awehlage]

Trying to maximize space in the cargo area. Made a tray with 2 1/2 inch risers on the bottom to fit my miscellaneous tools that I carry with me. Underside is coated with bedliner and the top is covered with black carpet.

Sent from my iPhone using Tapatalk

 

[Tin Foil Hat]

Damn, my man. You are good with fabrication. I have also concluded that we have cloned cars, except for all of your mods that aren't on mine.

 

[awehlage]

Damn, my man. You are good with fabrication. I have also concluded that we have cloned cars, except for all of your mods that aren't on mine.

Thanks Want to make it look as nice as possible even if nobody sees it but me.


Sent from my iPhone using Tapatalk