Dodge Durango Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
have a 2013 rt with abs light and traction light on i replaced all 4 wheel speed sensors and light still stays on and tips or tricks to help out new to the durangos thanks
 

·
Registered
2014 Jeep Grand Cherokee Overland V6
Joined
·
1,721 Posts
Get the code(s) read. Otherwise you're just throwing parts at the problem.
 

·
Premium Member
Joined
·
3,781 Posts
As DuRon says, pull the code(s). You will need a reader that can do ABS. Not all of them can. Follow that up with a battery disconnect reset. Maybe your light will clear if the faulty sensor being changed was the issue.

Don
 

·
Registered
Joined
·
2 Posts
Discussion Starter #4
As DuRon says, pull the code(s). You will need a reader that can do ABS. Not all of them can. Follow that up with a battery disconnect reset. Maybe your light will clear if the faulty sensor being changed was the issue.

Don
getting a mactool reader tomorrow and will let yall know and i will try the reset too
 

·
Registered
Joined
·
102 Posts
Silly question, but did you check the fluid and try bleeding the system? Its common for an air bubble to trigger brake sensors.
 
1 - 5 of 5 Posts
Top