04 durango limited 4x4 5.7 hemi 160,000 miles IT WONT START NEW BATTERY NO START, NEW STARTER, NO START I NEED HELP
yes Ill go check again and let you know what they are contact is good no corrosionDo you get any codes? Do you have a multimeter to confirm voltage to the fuse block?
Otherwise, I would start by looking at the main connectors for loose contacts or corrosion.
fuse are all good.relays are good tooCheck fuses and relays if there is no cranking. If you have it cranking, there are several more things to check.
no flashing lights fuel pump working. i gonna go get the codesAre you getting a red light flashing on the dashboard? If it is cranking, are you hearing the fuel pump prime? i would start with checking for codes
sorry e8 e9So, it is cranking over? I still didn't see the answer for this. Codes will help a lot
its cramking slowlyTina:
You need fuel, compression, and spark for the engine to run. Initially, I think some of us thought the engine was not turning over at all, hence my comment re being locked up.
Do you know how to do the key dance to obtain codes?
Start with the ignition key at off. Rotate it quickly from off to run (not start) 3x in 5 seconds. You'll end up with it in Run. Observe the odometer display. If there are codes, you'll see them there. At the end, you'll see pdone.
Don
ha ha not funnyTina:
Can you verify that the engine is not locked up. If it is, that would sure cause a no start lol!
Don
7E8 7E9no flashing lights fuel pump working. i gonna go get the codes
7E8 7E9sorry e8 e9
7E8,7E9yes Ill go check again and let you know what they are contact is good no corrosion
7E8 7E9So, it is cranking over? I still didn't see the answer for this. Codes will help a lot
7e8 7E9Do you get any codes? Do you have a multimeter to confirm voltage to the fuse block?
Otherwise, I would start by looking at the main connectors for loose contacts or corrosion.