Dodge Durango Forum banner
1 - 10 of 10 Posts

khoward

· Registered
2021 Dodge Durango SRT
Joined
·
4 Posts
Discussion starter · #1 ·
I know there is a ton of discussions about this but I need to replace my brakes and rotors. Since factory rotors are so crazy expensive I was looking for options.

I wen to a local shop and they replaced the rear brakes and rotors with no issues. However, the replacement rotors for the front did not fit. They said the ones they ordered had a different bolt pattern and they couldn't find any that would fit.

So I went to another shop who said he works on Brembos all the time. Told him about the last rotors not fitting and he said he knew what I needed. Went in to have them installed and, again, he said the ones he got also didn't fit as it was the wrong bolt pattern.

Has anyone successfully replaced the front rotors on a 2021 Durango SRT? If so, what exact rotors did you use? Hoping to save myself some time and not keep going in to have them installed only to find out they don't fit.
 
I feel before anyone can really help you, is what part number (or numbers) have they ordered/provided? The Durangos all share the same bolt pattern regardless of trim. This is pure conjecture, but it sounds like someone's just searching/looking for "SRT", not Durango SRT, because most hits are going to be the Challenger/Charger SRTs, which do have a different bolt pattern. But, if you can let us know what part numbers that they've given, that will help to determine that. Part of asking for that as well is because you don't have info on the history of the vehicle, such as are you the first owner or was it used, has it had front brake work before, etc. That will help us know if someone happened to do something crazy to it before and somehow put in different front wheel bearings with the wrong bolt pattern... VERY UNLIKELY, but I've seen crazier things happen. You'd know that however if you couldn't switch the wheels front to rear.

I suspect it's the first issue, that Challenger/Charger SRT rotors are being ordered instead of Durango SRT rotors. But trying to help confirm what the no kidding issue is before just recommending part numbers and still having issues.
 
  • Like
Reactions: Citadel Brian
Discussion starter · #4 ·
I feel before anyone can really help you, is what part number (or numbers) have they ordered/provided? The Durangos all share the same bolt pattern regardless of trim. This is pure conjecture, but it sounds like someone's just searching/looking for "SRT", not Durango SRT, because most hits are going to be the Challenger/Charger SRTs, which do have a different bolt pattern. But, if you can let us know what part numbers that they've given, that will help to determine that. Part of asking for that as well is because you don't have info on the history of the vehicle, such as are you the first owner or was it used, has it had front brake work before, etc. That will help us know if someone happened to do something crazy to it before and somehow put in different front wheel bearings with the wrong bolt pattern... VERY UNLIKELY, but I've seen crazier things happen. You'd know that however if you couldn't switch the wheels front to rear.

I suspect it's the first issue, that Challenger/Charger SRT rotors are being ordered instead of Durango SRT rotors. But trying to help confirm what the no kidding issue is before just recommending part numbers and still having issues.
The last shop ordered Duralast Brake Rotor 72139DL. AutoZone says they should fit but they do not.

I am the original owner of the Durango and it has not had any brake work done previously
 
Discussion starter · #5 ·
Did a quick search on the power stop website plugged in Durango 2020 SRT

power stop redirects to online vendors that also show that this is for the Durango SRT


all the sizes of the power stop rotor are posted here


Curious to hear the results
Thanks but the 2020 versions do not fit my 2021. I have also searched Powerstop but they do not have any rotors for the front, they only have rears that fit.
 
I would be shocked if the rotors changed between 2020 and.... ever on the Durango. There is a one piece rotor and two piece rotor for SRTs though.
 
Discussion starter · #8 ·
R1 Concepts lists rotors for the 2021 SRT.

Yes, I have found numerous ones that say that fit but so far the 2 that I have tried in fact did not fit. That is why I am looking for someone who has actually installed rotors on their 2021 so I know for sure.
 
AutoZone says they should fit but they do not.
Right there is your issue! Never trust an auto parts store system to match up parts right. I speak from a LOT of experience and having to tell them the actual correct part for my vehicles. This is why I wanted the part number to check what they are telling you is the "correct" part.

I looked up the Duralast Brake Rotor 72139DL in Autozone's website (using 2021 Durango SRT) The description on Autozone's site states the 72139DL is a 5x115 bolt pattern. The Durango is a 5x127 bolt pattern. Autozone's system is wrong, saying a Challenger/Charger 5x115 rotor fits a Durango's 5x127.

Everyone on here IS giving you good advice for ones that fit, Autozone is not.
 
  • Like
Reactions: DDC
1 - 10 of 10 Posts