I have a 2019 Dodge durango rt 30,000 miles on it, when I press on the gas the car does not accelerate how I would like it to. is there something set in computer that does not let the truck move quickly when step on gas. The engine and hemi kicks in I hear it but takes a little before the speed kicks in. Does any one experience this? Do you have any good Mods to get around this? Also I live in New York long island does anyone know of good speed shops that work on Durango upgrades??
2019 Dodge Durango rt slow acceleration response!!
Fitz2901
21 - 30 of 30 Posts
Yes. Pedal Commander is the brand. Extra safety, put a club on the steering wheel.
That is it. You will find different manufacturers offering a similar product but the Pedal Commander is the original and seems to be the most widely used.
This is a much cheaper solution if you want an occasional boost: Nitrous Express Hemi Plate Nitrous Kit: Chrysler / Dodge / Jeep 5.7L Hemi, 6.1L SRT8 & 6.4L 392 2005 - 2023
I will look that up....thank u..
Coyote
Don't waste a lot of time and money on this. the sport mode is crap and there is nothing wrong with the engine. Install a chip on the engine and get a good cold air box and filter. You will be amazed. Forget the exhaust its to expensive for what you get.
Do a search on the "chips". As for the engine controller identification:
Chrysler/Dodge/Jeep/RAM PCM Identification - VCM Suite 3.0+
I'm going to take a page out of Eric's book here. With support now available up to 2015, as well as Chrysler introducing multiple PCMs in the more recent years, I created this thread to aid in which PCM type you need to select to read your PCM. NOTE: You only will need to select a PCM type...
forum.hptuners.com
21 - 30 of 30 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
