I noticed the seatbelts of the second row dont block when pulling them quickly out.
Anybody familiar with this issue?
Anybody familiar with this issue?
Seatbelts second row '99 SLT
Gonzo Norway
1 - 6 of 6 Posts
Joined
·
118 Posts
I noticed the seatbelts of the second row dont block when pulling them quickly out.
Anybody familiar with this issue?
Anybody familiar with this issue?
Joined
·
118 Posts
I noticed they do block when are rolled op all the way, so there is a mechanism but it doesnt engage when the belt is rolled out a bit. Not so pleased since i have kids in the back. Same issue with 3rd row seatbelts.
Joined
·
98 Posts
All belts will lock under sideways g-forces, only the front ones also lock during standstill and sudden movements.
This is by design such that your kids can move around more freely and still be safe.
It is in accordanse with FMVSS (Federal Motor Vehicle Safety Standards) 209 og 210 and similar EU standards..
This is by design such that your kids can move around more freely and still be safe.
It is in accordanse with FMVSS (Federal Motor Vehicle Safety Standards) 209 og 210 and similar EU standards..
Joined
·
118 Posts
Thanks for the reply. I am used to european cars where they block similar in the back as up front.
Joined
·
118 Posts
Got problems with inspection again with the seatbelts not blocking.....
Second row blocks when fully rolled up, that'll pass but 3rd row wont block.
How do i get this through inspection?
Got the 3rd row blocking when quickly pulling it 10-15 times. Any ideas how to get this better or is it realy supposed to be like this??
Second row blocks when fully rolled up, that'll pass but 3rd row wont block.
How do i get this through inspection?
Got the 3rd row blocking when quickly pulling it 10-15 times. Any ideas how to get this better or is it realy supposed to be like this??
Joined
·
118 Posts
Found out that if you jack up the back real high or put him nose-down on a steep hill that seatbelts then will block. A ball shoul roll up a little track to block them.
Got it approved today explaining this to the inspector.
Got it approved today explaining this to the inspector.
1 - 6 of 6 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
