so the 21's have that ugly orange side marker.. found a solution today since Luxe doesn't have a "pre cut" like the do for all the chargers etc. I found some old ones left over that worked. I first tried to use a big piece leftover from a tail light and it was tough, but then I had a charger side marker pre cut and it's almost exactly the right size. If you start from the bottom curve with these, you only have to cut a tiny bit at the top and on the inside channel. with an exacto knife it was pretty easy and if I can do it, you all can too.
I don't know if they are the front or rears from the charger, it's the smaller ones and they call come in a set anyhow, not expensive. makes a big difference to me so I thought I'd share.
btw, I've used these a lot and they are dark smoke but at night the light comes through perfectly, from Luxe Auto Concepts... but they have many different finishes matt, glossy, etc. these are glossy/dark smoke .
hope this helps someone lol...
![113077]( "113077")
![113078]( "113078")
![113079]( "113079")
![113080]( "113080")
I don't know if they are the front or rears from the charger, it's the smaller ones and they call come in a set anyhow, not expensive. makes a big difference to me so I thought I'd share.
btw, I've used these a lot and they are dark smoke but at night the light comes through perfectly, from Luxe Auto Concepts... but they have many different finishes matt, glossy, etc. these are glossy/dark smoke .
hope this helps someone lol...
