I need to replace my entire brake lines on my 01’ Durango. After noticing a puddle underneath the truck, I checked to see what it was. It was of course brake fluid. I traced the one piece line that goes from front to rear and that was the culprit. There was a section about 3 feet in that was bent and thus the leak. I want to replace that piece only. It was a bitch to get out due to all the bends. Is there a way to just use a straight piece to replace it? It’s almost 9 feet long. Do I have to buy a roll of line and connectors too. I know I have to double flare the ends. That’s what the old line had was double flare. Any help would be appreciated.
