Has anyone put the fender flares on an older Durango? The SRT fender flares are a godsend for us lifted/leveled guys. Does anyone know part numbers?
SRT Fender Flares on 2014
HemiAaron
1 - 18 of 18 Posts
Joined
·
88 Posts
http://www.sarona.com/ this company sells the SRT fender kit that fits our 2014. I emailed them and confirm it.
Joined
·
478 Posts
Anyone know if the OEM fender flares will fit? Will they line up w/ the stock front & rear bumper on a 2014?
Joined
·
478 Posts
Anyone have the part numbers for the SRT fender flares?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Joined
·
1,206 Posts
Tried looking it up on various parts websites but when cross checking different years and trim levels they all say compatible from 2011-2019/2020. So what I’m gathering is non-SRT fender flares will fit the SRT but not sure how it works the other way around when trying to put SRT fender flares on let’s say a R/T.
Sarona sells a kit and they also note the lower rocker panel also needs to be purchased. I don’t want to pay their prices for unpainted parts...
Sent from my iPhone using Tapatalk
Sarona sells a kit and they also note the lower rocker panel also needs to be purchased. I don’t want to pay their prices for unpainted parts...
Sent from my iPhone using Tapatalk
Joined
·
478 Posts
That’s super helpful thank you guys. The problem I have now is determining the correct SRT part#s for the fender flares & rockers. Is there a site where you can enter a vin & it will tell you the exact part?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Joined
·
1,206 Posts
There are 3-5 different part numbers for the fender flare molding and side skirts depending on year and trim level. There are 4 different part numbers for the front left wheel flare molding:
1RK21TZZAE
57010621AD
6DR84TZZAC
6DR85TZZAC
Some of the above part numbers are also the same for the R/T EXCEPT for:
6DR84TZZAC
6DR85TZZAC
[emoji1369]Are these the SRT ones?
Sent from my iPhone using Tapatalk
Joined
·
531 Posts
When I was trying to find molded splash guards for my 2019 R/T I discovered that no one makes molded splash guards for the R/T. There is a difference in the rockers and perhaps the fender flares between the R/T and the other non SRT models. I was able to adapt Mopar splash guards to fit the rear of my R/T. I was also able to get a set of SRT front splash guards from ZL1 Addons to fit my R/T, but the SRT rockers and fender flares are different. My point is you might not be able to get the SRT fender flares to fit perfectly with non SRT rockers without adding SRT rockers too. But I'm interested to see if just changing the fender flares to the SRT version works.
Joined
·
478 Posts
The rockers look similar...hard to tell..anyone know? But, the fender flares are dec diff. See photos from dodge’s car builder site
![Image]()
![Image]()
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Joined
·
1,206 Posts
The following is needed to put SRT fender flare wheel moldings onto a non-SRT trim level:
1. Side skirts
2. SRT front fascia (bumper/hood)
3. 2018+ rear valence and associated parts (the parts below the rear bumper)
I gathered this information from multiple sources including other members and online parts dealers.
Sent from my iPhone using Tapatalk
1. Side skirts
2. SRT front fascia (bumper/hood)
3. 2018+ rear valence and associated parts (the parts below the rear bumper)
I gathered this information from multiple sources including other members and online parts dealers.
Sent from my iPhone using Tapatalk
Joined
·
478 Posts
Joined
·
1,206 Posts
1 - 18 of 18 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
