1998 D power windows 25 amp fuse.

ronrymanr · Dec 29, 2019

GREETINGS to all. The power windows stopped working. Tested all fuses working. The power window metal 25 amp fuse has continuity and there is power at one side of fuse plug . The power will not continue through this fuse. Tried a REPLACEMENT same issue. Also door lock at drivers door same thing no power. Passenger door locks click and are operational. Window power not working at any door. Please advise. ??? Thank you.

Sent from my SM-A205U using Tapatalk

DuRonbo · Dec 30, 2019

Hmmm. With a metal casing I'd say it's a circuit breaker type device and not a fuse. Chrysler typically used a Circuit Breaker for recent power window circuits. Once the circuit breaker exceeded a certain amount of current it would shut off. As in raising/lowering the window and came to a stop. The current overload would open the breaker.

ronrymanr · Dec 30, 2019

DuRonbo said:
Hmmm. With a metal casing I'd say it's a circuit breaker type device and not a fuse. Chrysler typically used a Circuit Breaker for recent power window circuits. Once the circuit breaker exceeded a certain amount of current it would shut off. As in raising/lowering the window and came to a stop. The current overload would open the breaker.

At the fuse box I have 12 volts on one terminal. when I insert the 25 amp breaker no power. ?Do I need to test light it while pressing window switch down? Continuity test shows 25 amp fuse with beep Continuity. Thank you .

Sent from my SM-A205U using Tapatalk

haroldacsatterfield · Dec 31, 2024

Did you ever figure out the issue? I’m going through the same thing.

1998 D power windows 25 amp fuse.

ronrymanr

DuRonbo

ronrymanr

haroldacsatterfield

Top Contributors this Month

Recommended Communities