Has anyone installed a plug and play HID kit?

amelnik · Jun 18, 2019

Resistors get very hot. Best thing is to get a couple of aluminum strips, about 1/4" thickness, 4"-5" in length, that should be enough to dissipate the heat, and mount the resistors on the ends of those and then you can attach the other end to practically any panel under the hood. Check home depot or lowes hardware section, they usually have flat or angle stock there.

Rwilliams192 · Jun 19, 2019

Thanks, I appreciate the reply!

LLSJSXT19 · Jun 19, 2019

Boltzen AC CANBUS Series: 55w HID Kit from OPT7 site , Do we need the Relay Harness / Anti-Flicker Bundle? and when ordering, do I get the 9005? will the 9005 HID still have the low/ high beam option? and is it same for the H11 fogs?

Ridewitme · Jun 20, 2019

LLSJSXT19 said:
Boltzen AC CANBUS Series: 55w HID Kit from OPT7 site , Do we need the Relay Harness / Anti-Flicker Bundle? and when ordering, do I get the 9005? will the 9005 HID still have the low/ high beam option? and is it same for the H11 fogs?

Why are you going with fogs? LEDs are better and just plug right in. No issues.

Ridewitme · Jun 20, 2019

LLSJSXT19 said:
Boltzen AC CANBUS Series: 55w HID Kit from OPT7 site , Do we need the Relay Harness / Anti-Flicker Bundle? and when ordering, do I get the 9005? will the 9005 HID still have the low/ high beam option? and is it same for the H11 fogs?

Why are you going with HIDs? LEDs are better and just plug right in. No issues.

LLSJSXT19 · Jun 21, 2019

Going to get the CREE XLamp XB-D LED h11 fog. And talked with opt7 last night and for the 19 sxt I will need this.

Has anyone installed a plug and play HID kit?

amelnik

Rwilliams192

LLSJSXT19

Ridewitme

Ridewitme

LLSJSXT19

Attachments

Top Contributors this Month

Recommended Communities