Hey every ones, i buy a 2015 Durango R/T, i want to do some mods, i'm thinking to upgrade to brembos but right now i consider the jeep srt8 Calipers. Any body know if it's fit on Durango?. Thanks.
Brembo Calipers.
CHACAL305
21 - 40 of 71 Posts
He said that these were going to be able to fit the stock wheels
Joined
·
2,027 Posts
According to r1 there fitament is for 2010+ durango stock wheels.
I told them to double check for 2011-15 fitament. This is the hold on right now.
When I went to sema I saw r1 products up close and I can say they are top notch product that most people have never heard of.
Crossing my fingers on this one.
I told them to double check for 2011-15 fitament. This is the hold on right now.
When I went to sema I saw r1 products up close and I can say they are top notch product that most people have never heard of.
Crossing my fingers on this one.
Joined
·
1,114 Posts
More than a few LX guys are running them as well.
Joined
·
2,027 Posts
Front R1 Forged Series 356mm 8 Piston BBK (Fixed 2 Piece)
Rear R1 Forged Series 356mm 6 Piston BBK (Fixed 2 Piece)
Total: $3,785 w/o Handbrake
Front R1 Forged Series 356mm 8 Piston BBK (Fixed 2 Piece)
Rear R1 Forged Series 356mm 6 Piston BBK (Fixed 2 Piece)
Total: $3,930 w/ Handbrake
Front R1 Forged Series 356mm 6 Piston BBK (Fixed 2 Piece)
Rear R1 Forged Series 356mm 4 Piston BBK (Fixed 2 Piece)
Total: $3,641 w/o Handbrake
Front R1 Forged Series 356mm 6 Piston BBK (Fixed 2 Piece)
Rear R1 Forged Series 356mm 4 Piston BBK (Fixed 2 Piece)
Total: $3,786 w/ Handbrake
Front R1 Forged Series 380mm 8 Piston (Med) BBK (Fixed 2 Piece)
Rear R1 Forged Series 356mm 6 Piston BBK (Fixed 2 Piece)
Total: $3,944 w/o Handbrake
Front R1 Forged Series 380mm 8 Piston (Med) BBK (Fixed 2 Piece)
Rear R1 Forged Series 356mm 6 Piston BBK (Fixed 2 Piece)
Total: $4,088 w/ Handbrake
356mm (14.02") FRONT/REAR
380mm (14.96") FRONT/REAR
Consider you must buy new rims and tires if you go the oem route this kit might work for you
This is everything to front and rear big brake kit to giant brake kit.
He also told me the 356mm min rim size is 18 in so limited and sxt guys have a option they never had be for with there oem rims
Rear R1 Forged Series 356mm 6 Piston BBK (Fixed 2 Piece)
Total: $3,785 w/o Handbrake
Front R1 Forged Series 356mm 8 Piston BBK (Fixed 2 Piece)
Rear R1 Forged Series 356mm 6 Piston BBK (Fixed 2 Piece)
Total: $3,930 w/ Handbrake
Front R1 Forged Series 356mm 6 Piston BBK (Fixed 2 Piece)
Rear R1 Forged Series 356mm 4 Piston BBK (Fixed 2 Piece)
Total: $3,641 w/o Handbrake
Front R1 Forged Series 356mm 6 Piston BBK (Fixed 2 Piece)
Rear R1 Forged Series 356mm 4 Piston BBK (Fixed 2 Piece)
Total: $3,786 w/ Handbrake
Front R1 Forged Series 380mm 8 Piston (Med) BBK (Fixed 2 Piece)
Rear R1 Forged Series 356mm 6 Piston BBK (Fixed 2 Piece)
Total: $3,944 w/o Handbrake
Front R1 Forged Series 380mm 8 Piston (Med) BBK (Fixed 2 Piece)
Rear R1 Forged Series 356mm 6 Piston BBK (Fixed 2 Piece)
Total: $4,088 w/ Handbrake
356mm (14.02") FRONT/REAR
380mm (14.96") FRONT/REAR
Consider you must buy new rims and tires if you go the oem route this kit might work for you
This is everything to front and rear big brake kit to giant brake kit.
He also told me the 356mm min rim size is 18 in so limited and sxt guys have a option they never had be for with there oem rims
Joined
·
486 Posts
Not for a well designed, high quality, massive brake upgrade kit. Nope....that's about what I would have expected.
Turborusty
Joined
·
2,027 Posts
Oem srt calipers on eBay cheapest I ve found them 1200 with pads still need rotors price ?
rims and tire? Your gonna be over 1k for that prob closer to 2k with good tires
Those prices look realistic. However I got takeoff brembos for $400 and really good condition spider monkey rims and tires 300 miles on them for about 3K before selling my stickers. Figure 400 for rotors and I'm going to be 2500-2800 in and have brembos an 20x10 forged wheels. Still about $1000 more dollars to go this route but if you like stock wheels it works out close at least.
Joined
·
2,027 Posts
I don't doubt you got a good deal but it's not typical for the average person. They will have to wait.
I know cuz I'm one of them. I guess eBay caught on and the prices have stayed up there for the cailpers
Also the the prices in there are for 8 piston calipers with much larger rotors then Brembos
Does the srt rotors have aluminum centers for weight savings ?
Joined
·
1,939 Posts
DAMN!! I had no idea!
Joined
·
2,027 Posts
You gonna pay to play, I'm pretty sure this set up with be much lighter them oem brakes .
I held there 8 piston caliper at sema and was amazed by how light for the size.
Compared to a evo brembo I held there 8 piston is lighter.
Joined
·
1,939 Posts
Joined
·
2,027 Posts
How much were you wheels n tires to make the set up work?
What's creative purchasing ?
Joined
·
1,196 Posts
20x9" SRT reps $800 use the stock 265/50/20 tires.
I found 3 of the Bremobs as rebuilt Centric parts loaded with Centric semi metallic brake pads. Rears were $100 each, passenger front rebuilt with pads $200, Drivers front new @ dodge $340.
Then I was able to purchase the matching front pad since oem brembo is just caliper, also hours of searching to find hardware parts that are out there for pennies after people telling me they are not. The calipers are the same as ones on Caddy's Nappa sells a very important bolt i needed for $6.00 and complete hardware kits for $20 . i bought all spares once i found them.
![Image]()
2 examples
http://www.napaonline.com/Catalog/C...CatalogItemDetail.aspx/Brake-Caliper-Housing-Bolt-Front/_/R-UBP83627_0282134875
http://www.napaonline.com/Catalog/C...alog/CatalogItemDetail.aspx/Caliper-Hardware-Kit-Front/_/R-UBP81596A_0424884865
Centric part numbers
Calipers Posi-Quiet Loaded Caliper SRT8; 380mm Front Disc Front Left 142.58014
Calipers Posi-Quiet Loaded Caliper SRT8; 380mm Front Disc Front Right 142.58013
Calipers Posi-Quiet Loaded Caliper SRT8; 380mm Front Disc Rear Left 142.58514
Calipers Posi-Quiet Loaded Caliper SRT8; 380mm Front Disc Rear Right 142.58513
Here is my $200 (for both) rear upgrade, custom Decals were $10.00 rebuilt's are powder coated, all new pistons and deals but no decal.
![Image]()
[/IMG]
I found 3 of the Bremobs as rebuilt Centric parts loaded with Centric semi metallic brake pads. Rears were $100 each, passenger front rebuilt with pads $200, Drivers front new @ dodge $340.
Then I was able to purchase the matching front pad since oem brembo is just caliper, also hours of searching to find hardware parts that are out there for pennies after people telling me they are not. The calipers are the same as ones on Caddy's Nappa sells a very important bolt i needed for $6.00 and complete hardware kits for $20 . i bought all spares once i found them.
2 examples
http://www.napaonline.com/Catalog/C...CatalogItemDetail.aspx/Brake-Caliper-Housing-Bolt-Front/_/R-UBP83627_0282134875
http://www.napaonline.com/Catalog/C...alog/CatalogItemDetail.aspx/Caliper-Hardware-Kit-Front/_/R-UBP81596A_0424884865
Centric part numbers
Calipers Posi-Quiet Loaded Caliper SRT8; 380mm Front Disc Front Left 142.58014
Calipers Posi-Quiet Loaded Caliper SRT8; 380mm Front Disc Front Right 142.58013
Calipers Posi-Quiet Loaded Caliper SRT8; 380mm Front Disc Rear Left 142.58514
Calipers Posi-Quiet Loaded Caliper SRT8; 380mm Front Disc Rear Right 142.58513
Here is my $200 (for both) rear upgrade, custom Decals were $10.00 rebuilt's are powder coated, all new pistons and deals but no decal.
How were you able to get the calipers so cheap? I just threw one of those part #'s in my google machine and almost nobody had them but they all had them listed with the price and then a $100+ core deposit. How and where did you get yours without having to pay a core deposit?20x9" SRT reps $800 use the stock 265/50/20 tires.
I found 3 of the Bremobs as rebuilt Centric parts loaded with Centric semi metallic brake pads. Rears were $100 each, passenger front rebuilt with pads $200, Drivers front new @ dodge $340.
Then I was able to purchase the matching front pad since oem brembo is just caliper, also hours of searching to find hardware parts that are out there for pennies after people telling me they are not. The calipers are the same as ones on Caddy's Nappa sells a very important bolt i needed for $6.00 and complete hardware kits for $20 . i bought all spares once i found them.
![Image]()
2 examples
NAPA AUTO PARTS
NAPA AUTO PARTS
Centric part numbers
Calipers Posi-Quiet Loaded Caliper SRT8; 380mm Front Disc Front Left 142.58014
Calipers Posi-Quiet Loaded Caliper SRT8; 380mm Front Disc Front Right 142.58013
Calipers Posi-Quiet Loaded Caliper SRT8; 380mm Front Disc Rear Left 142.58514
Calipers Posi-Quiet Loaded Caliper SRT8; 380mm Front Disc Rear Right 142.58513
Here is my $200 (for both) rear upgrade, custom Decals were $10.00 rebuilt's are powder coated, all new pistons and deals but no decal.
[/IMG]![Image]()
21 - 40 of 71 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
