What did you do to your Durango today?

Robfrmny21 · Jul 3, 2015

wataboy said:
What is this catch can I keep hearing about?

A by product of a engine running is called blow by which is A fine vapor mist of oil.
A catch can does what it's called catches the vapors and allows it to pool in the can so it can be drained.
If a catch can is not in place the vapor is reintroduced into the engine to be burned up which can reduce performance and mpgs over the life of engine.

Hollywood · Jul 4, 2015

I want those those brakes so bad!! Right now I have a chunk sitting in savings for Whipple to be ready for a 2015 application...then brakes.

Hollywood · Jul 4, 2015

I just got back from my epic road trip adventure with my girlfriend and 2 boys (age 9 & 7). We drove from Phoenix, AZ to mid-Michigan, then to NYC to visit my sister, back to Michigan, then back to AZ on route 80 over the Rockies. I have to say that radar cruise control is AWESOME, not one hiccup. My new Toyo Proxes STIIs were awesome in rain, quiet on the highway and really good through the curves. I used iPads attached to the headrests and ALL the power and charging ports. This trucks amazing in every respect (2015 R/T AWD with every option except DVD). Hopefully Whipple will finish their 2015 software soon and I can get that put on, but with just a Volant, custom X pipe and Gibson mufflers I never had any situation where I really needed more power.

AmStatic · Jul 4, 2015

Billet Tech catch can installed, with documentation on how-to for the 3.6 Pentastar.

Temporary hoses (ordering braided next week) and plastic barb couplers (brass ones coming next week too)

http://bit.ly/BT_Catch_Can_Install-3point6

boomer775 · Jul 4, 2015

Touched-up and wet-sanded out the wife's love-taps, clay bar, polished out swirls, sealed the paint. Tomorrow is a couple coats of carnauba and the engine bay, along with some pics

AmStatic · Jul 4, 2015

boomer775 said:
Touched-up and wet-sanded out the wife's love-taps, clay bar, polished out swirls, sealed the paint. Tomorrow is a couple coats of carnauba and the engine bay, along with some pics

looking forward to pics of the engine bay tomorrow

fat tony · Jul 4, 2015

AmStatic said:
Billet Tech catch can installed, with documentation on how-to for the 3.6 Pentastar.

Temporary hoses (ordering braided next week) and plastic barb couplers (brass ones coming next week too)

http://bit.ly/BT_Catch_Can_Install-3point6

View attachment 23560

Very good job. And great wrightup. Now all you need is a CAI and you would be almost set.

AmStatic · Jul 4, 2015

fat tony said:
Very good job. And great wrightup. Now all you need is a CAI and you would be almost set.

CAI is next!

Thanks for your suggestions and tips.. The sent the wrong barb connectors, so I'm gonna have to redo the entire thing next week... but at least now I know what to do..

fat tony · Jul 4, 2015

AmStatic said:
CAI is next!

Thanks for your suggestions and tips.. The sent the wrong barb connectors, so I'm gonna have to redo the entire thing next week... but at least now I know what to do..

Really. The same thing happened to me with speedlogix. Well the good things ng is that you are close to them. I had to wait like a week or a bit more to get them.

AmStatic · Jul 4, 2015

Oh, they're gonna have to send them to me this time.. lol.

I didnt even think to look at the barb connectors or remember that they needed to be different sized...

boomer775 · Jul 4, 2015

AmStatic said:
looking forward to pics of the engine bay tomorrow

As requested

kpeterha · Jul 5, 2015

BT catch can, 170* t-stat and I modified Hemifever tune to reflect new low speed and high speed fan requirements. Hoping to see some increase in HP and MPG.

Griffin R/T · Jul 5, 2015

I painted calipers and put a fresh coat of Plasti dip on my rims. Pics to come.

kpeterha · Jul 5, 2015

Griffin R/T said:
I painted calipers and put a fresh coat of Plasti dip on my rims. Pics to come.

I need to put another coat on too. Going to try plastic grocery bag technique I saw on utube.

Griffin R/T · Jul 5, 2015

AmStatic · Jul 5, 2015

kpeterha said:
I need to put another coat on too. Going to try plastic grocery bag technique I saw on utube.

What is this "plastic grocery bag technique" you speak of?

Griffin R/T · Jul 5, 2015

AmStatic said:
What is this "plastic grocery bag technique" you speak of?

Use a plastic bag to cover brakes and calipers. Spray / dip rims while still on vehicle.

AmStatic · Jul 5, 2015

Ok..yes..Ive seen that.. Awesome idea if you're doing the wheels for sure.

I've actually seen it done using a single kitchen garbage bag...looks pretty easy..

Cdorocki · Jul 7, 2015

Full clay bar, polish, and wax detail. Took a while, but well worth it!

boomer775 · Jul 7, 2015

Cdorocki said:
View attachment 23609

Full clay bar, polish, and wax detail. Took a while, but well worth it!

Looks great! The spider monkeys look awesome on the black

What did you do to your Durango today?

Robfrmny21

Hollywood

Hollywood

AmStatic

boomer775

AmStatic

fat tony

AmStatic

fat tony

AmStatic

boomer775

kpeterha

Griffin R/T

kpeterha

Griffin R/T

AmStatic

Griffin R/T

AmStatic

Cdorocki

boomer775

Top Contributors this Month

Recommended Communities