Owned the 2014 citadel for 8 months now and never had a problem with the auto high beams. Sometimes I turn the feature off or someone else in the family that may drive it turns it off either by accident or on purpose from time to time. Last night I go to turn them on and I'm not greeted by the automatic high beams enabled message that you get when you turn them on or when you turn them off you get disabled. I check the settings and unless I'm not in the right menu the auto dim high beams feature is turned on. Anyone else experience this issue?
Auto high beams appear to have bitten the dust
Jonathonmp
1 - 11 of 11 Posts
Joined
·
58 Posts
Owned the 2014 citadel for 8 months now and never had a problem with the auto high beams. Sometimes I turn the feature off or someone else in the family that may drive it turns it off either by accident or on purpose from time to time. Last night I go to turn them on and I'm not greeted by the automatic high beams enabled message that you get when you turn them on or when you turn them off you get disabled. I check the settings and unless I'm not in the right menu the auto dim high beams feature is turned on. Anyone else experience this issue?
Joined
·
58 Posts
I don't get the message. It didn't seem to work last night either. More times then not the high beams will work on my road back to the house but sometimes becuase of the yellow signs along the dark road it will not illuminate them so its hard to say becuase I noticed this issue in that may or may not work zone where the signs are
Joined
·
58 Posts
Maybe I'm looking at the wrong setting? I'm assuming the auto dim high beam is the name of the feature unless there is another setting I'm overlooking. In the book it says it should say automatic high beams but I cannot locate that setting at all just that auto dim high beams setting.
Joined
·
2,287 Posts
you're definitely using the right setting. are you on the latest uConnect software version? this shouldn't be causing the issue, as they worked for you in the past, but maybe updating the software will help...
Joined
·
58 Posts
Yes I have the updated software. Did it they day I got it home back in October. That fixed the sluggish camera haha
Joined
·
2,752 Posts
I have not had a problem in my Durango over the last year. I had a problem with them in my wife's new town and country. I ended up turning off the van and restarting it. That took care of the problem and we have not had a problem since. I would take it into Dodge and have them fix it.
Joined
·
29 Posts
You checked under uconnect - settings - lighting? There should be an option to enable or disable the auto high beams. Also, I believe the your lighting control dial needs to be set to auto for it to work as well.
Very True
Joined
·
486 Posts
Yes...has to be in auto. I was pissed because mine weren't working.....then one day I switched it to auto and BAM, they worked. ....oops.
Turborusty
Turborusty
1 - 11 of 11 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
