I am still debating added the fender hash marks on my D but I can't decide on a color. Those of you with Black D's please post some picks.
Fender Hash stripes on black gen 3
rrhodes
1 - 20 of 22 Posts
Joined
·
145 Posts
Here's black on red
Joined
·
419 Posts
Here is flat black on mine.
![Image]()
Joined
·
504 Posts
liking that, I have grey pinstripes I will have to remove but that is an optionHere is flat black on mine.
![Image]()
Joined
·
543 Posts
Any good graphics shop should be able to do it for $75-$100.
4" wide. I went a bit less ******....by choice.
You can also order them.
Rocky Mountain Graphics | Durango Fender Hash Stripes
Now those are only $25...and you can get them in any color imaginable.
But....if you screw it up...you may have to order another set. I decided to get it done professionally as my search warrant writing skills...and ticket writing skills are top notch! Fender stripe install....not so much
4" wide. I went a bit less ******....by choice.
You can also order them.
Rocky Mountain Graphics | Durango Fender Hash Stripes
Now those are only $25...and you can get them in any color imaginable.
But....if you screw it up...you may have to order another set. I decided to get it done professionally as my search warrant writing skills...and ticket writing skills are top notch! Fender stripe install....not so much
X 2 That looks great, the reflection of the garage door makes it look like you have a scoop on your hood
Here is flat black on mine.
![Image]()
Joined
·
543 Posts
Just google Graphics Shop NYC....and talk to them. Send them a few pics from the forums here and they'll get it.
I'm sure you have multiple graphics shops out in the area.
Good luck!
Here:
https://www.google.com/#q=NYC+vehicle+graphics+shops
I'm sure you have multiple graphics shops out in the area.
Good luck!
Here:
https://www.google.com/#q=NYC+vehicle+graphics+shops
Joined
·
419 Posts
Never noticed that, it does look like I have a hood scoop .. I like it too!
Joined
·
419 Posts
I ordered the stripes off of ebay, but I had someone local put them on for me. I wasn't about to do it and screw it up lol.
Joined
·
636 Posts
If you order from rockymountaingraphics.com, they come pre-cut. All you need to do is spray soapy water on, squeegee the water out from under them, let them dry for a half hour, peel off the paper on top, and pin-poke any remaining bubbles.
This took under an hour, and did not require anything more than the plastic yellow creditcard "squeegee" used to put on window tint, and a spray bottle of water with some dish soap in it. A tape measure helps to make sure your driver and passenger sides are equal distant. The wheel well curvature is already cut. And you line that up with the straight line of the hood. Piece of cake.
Joined
·
636 Posts
Thanks..
Like i said.. it's really easy. They come pre-cut. the 2 stripes for each side are already laid out on the paper spaced evenly. You peel off the sticky side of paper, spray the vinyl and the fender with the soapy water, which lets them slide around for moving them into place. Get the curved cut around the wheel well to line up with the straight line of the hood, and start squeegeeing.
The hardest part of this project was the wait from Tuesday when they arrived until Saturday when I could apply them..
Is the price for both sides?Any good graphics shop should be able to do it for $75-$100.
4" wide. I went a bit less ******....by choice.
You can also order them.
Rocky Mountain Graphics | Durango Fender Hash Stripes
Now those are only $25...and you can get them in any color imaginable.
But....if you screw it up...you may have to order another set. I decided to get it done professionally as my search warrant writing skills...and ticket writing skills are top notch! Fender stripe install....not so much
1 - 20 of 22 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
