Time for Hubs

Uncle Frodo · Nov 13, 2010

Installed Hub Assembly

TOOLS USED

3/4? Deep 1/2?? Drive Socket- Lug Nuts
Slip-jaw Pliers- Cotter Pins
32mm Deep 1/2?? Drive Impact Socket- Hub Nut
7mm Hex Bit 3/8?? Drive- Caliper Pins
13mm Flex Head 3/8? Drive Socket- ABS Shield Bolts
8mm Flex Head 3/8? Drive Short Socket-
ABS Wire Mount Bolt to Steering Knuckle
21mm Short 1/2? Drive Socket- Hub Bolts
21mm Flex Head 3/8? Drive Short Socket- Hub Bolts
Torque: Hub Bolts 123 Ft. Lbs

Items needed

Cotter Pins (2ea)
Tree Plugs (2ea)

at 200K service.

Nav · Nov 13, 2010

He's alive! He's alive! How ya been, bud?? Long time no hear.

tomk · Nov 13, 2010

Hey Wayne. good to "hear your voice".

?tom

Uncle Frodo · Nov 14, 2010

Having too much fun! :thumbsup: Here in the Sunshine State

Tazdevil · Nov 14, 2010

WOW Been a long time!! Good to see you're still kicking.

greendurango · Nov 14, 2010

sounded like a job! :lol:

FSTDANGO3 · Nov 14, 2010

Good to hear from you Wayne.

GolsonMolson · Nov 21, 2010

A loud groan turning left quiet turning right. Is that the Passenger side or Drivers side front bearings? Can never remember.

tomk · Nov 21, 2010

GolsonMolson said:
A loud groan turning left quiet turning right. Is that the Passenger side or Drivers side front bearings? Can never remember.

Does it happen when you turn left into the Package Store parking lot? If so, then it might be the wife

Seriously, it's usually the bearing that gets loaded (see? package store?) so if it groans turning left, it's likely the right bearing (that's where the weight goes)

?tom

GolsonMolson · Nov 22, 2010

Thanks, kind of thought that but just wanted to confirm. Damn wife! :wall:

UPDATE
Ok - $221 for the hub at Carquest with a 1 yr warranty
$97 for the broken sway bar link.

Installation - no charge at the local high school auto shop. Scheduled for Friday.

Time for Hubs

Uncle Frodo

Nav

tomk

Uncle Frodo

Tazdevil

greendurango

FSTDANGO3

GolsonMolson

tomk

GolsonMolson

Top Contributors this Month

Recommended Communities