No adapter needed.
When I had my x-pipe put on my exhaust guy dropped the exhaust and re-tacked everything with them straight. This was done back in September and hasn't moved. The pics above are from a few days ago.
2016 Dodge Durango RT - Modded
1993.5 Supra TT HT BPU++++ 6MT 40K orig miles
2006 ZO6 6MT 703HP 20K miles
Well, like I said earlier, I went and purchased the Pypes brand 4 1/2 inch black tips. I just can't understand where they can say that you can just bolt them on.
I cut off the original exhaust tips and left about 1 1/2 inches on the resonator and then slipped over a 1 1/2 inch long adapter and still had to cut 2 individual half pieces of adapter to fill in the gap. I noticed on the box of the tips that they had sent me was for a 2010 Camaro, but it was still a two and a half inch inlet.
I tighten the bolts on the tips so much that I was waiting for the weld to break. It didn't want to clamp down for nothin'.
Anyway, I'll be taking it to the shop where I had my cutouts put on and have them weld the tips to the resonators just to play it safe.
Where’s the pics?
Sent from my iPad using Tapatalk
How do they look? Any pics?
Here's a couple of pics with the Pypes 4 1/2 inch tips. The pictures don't really do them justice because they're black tips on a black vehicle. I'm loving the hell out of them though!
Last edited by PhilB; 05-10-2019 at 12:55 PM.
They look really good. Very Aggressive!!!