I just put one of these in my truck. I got it for $49.59 during https://www.eastcoastmoparts.com/ Black Friday sale. The part number is 68299963AB. It was pretty easy.
I followed the steps in this thread. With a one step different I'll talk about.
http://www.dodgedurango.net/forums/...ge-durango-how-tos/15584-how-change-starter-button-red-srt-style-2014-only.html
First thing is if you gonna do this get your self a set of trim tool. You can get a nice set at Harbor Freight for pretty cheap.
Now you they widest one you have and pop of the trim bezel around the radio. Start at the center top and just work your way around. Just use the tool to pop the clips. Unplug the one plug on the back and set it out of the way.
Remover the four 7mm screws. I just let the radio face hag. It will be fine. there are bunch of plus and I didn't want to discount them all.
![]()
This is what I kind of did different. I took one of my small trim tool and slipped it in on the top of the button from the front to depress the tab on the top left side. There are three tabs in all top left and right and one center bottom.
![]()
Now you'll have to reach inside the radio hole right under the vent and release the right top and the bottom. You can see the back of the button in the picture, but I circled where you are gonna see it.
![]()
Once you put a little pressure on the tabs it will pop right out. One you get it released you can pull it forward a little and turn it so you can unplug the harness from it. It's in a bad spot to try and unplug it while it still seated.
Just pull it out and release the trim ring and swap it to the new button.
![]()
Put it back in the hole but don't seat it until you plug the harness back in.
Seat it. Reseat the radio face, screw in the four 7mm screws and reseat the trim panel and that's it. Super easy.
It looks cool in the dash and the best part to me is the back lights on the new push start button are blue and match the rest of the interior now.
![]()
If you notice the pictures on the tread that I used to di this you'll notice that the part they were using has the yellow back lights like the stock push start button had.
Sorry some of the pictures posted sideways...LOL
I followed the steps in this thread. With a one step different I'll talk about.
http://www.dodgedurango.net/forums/...ge-durango-how-tos/15584-how-change-starter-button-red-srt-style-2014-only.html
First thing is if you gonna do this get your self a set of trim tool. You can get a nice set at Harbor Freight for pretty cheap.
Now you they widest one you have and pop of the trim bezel around the radio. Start at the center top and just work your way around. Just use the tool to pop the clips. Unplug the one plug on the back and set it out of the way.
Remover the four 7mm screws. I just let the radio face hag. It will be fine. there are bunch of plus and I didn't want to discount them all.
This is what I kind of did different. I took one of my small trim tool and slipped it in on the top of the button from the front to depress the tab on the top left side. There are three tabs in all top left and right and one center bottom.
Now you'll have to reach inside the radio hole right under the vent and release the right top and the bottom. You can see the back of the button in the picture, but I circled where you are gonna see it.
Once you put a little pressure on the tabs it will pop right out. One you get it released you can pull it forward a little and turn it so you can unplug the harness from it. It's in a bad spot to try and unplug it while it still seated.
Just pull it out and release the trim ring and swap it to the new button.
Put it back in the hole but don't seat it until you plug the harness back in.
Seat it. Reseat the radio face, screw in the four 7mm screws and reseat the trim panel and that's it. Super easy.
It looks cool in the dash and the best part to me is the back lights on the new push start button are blue and match the rest of the interior now.
If you notice the pictures on the tread that I used to di this you'll notice that the part they were using has the yellow back lights like the stock push start button had.
Sorry some of the pictures posted sideways...LOL
